Sigma fp bottom arca tripod plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact arca-type tripod plate and strap connector designed to fit the bottom of the Sigma fp
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Sigma fp.
I've tested it with these screws: https://www.mcmaster.com/92220A181/
and there is an image attached with the specifications, since that's about as big as it can fit in terms of head width and height.
Just get a 1/4 20 screw that is about 1/4" long, with a head no wider than 0.375".
⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.
I would not recommend mounting / carrying the camera by this with heavy lenses - though with very heavy lenses you should probably not carry it by the body anyway.