Sigma fp bottom arca tripod plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact arca-type tripod plate and strap connector designed to fit the bottom of the Sigma fp
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very compact arca-type tripod plate and bottom strap connector designed to fit the Sigma fp.
I've tested it with these screws: https://www.mcmaster.com/92220A181/
and there is an image attached with the specifications, since that's about as big as it can fit in terms of head width and height.
Just get a 1/4 20 screw that is about 1/4" long, with a head no wider than 0.375".
⚠ Disclaimer! Use at your own risk!
I have been using 3d printed tripod plate + strap connector combos for years with no problems, but ultimately the safety of your gear is up to you, and I take no responsibility for any damages caused if your copy of this design breaks or does not work with your gear.
I would not recommend mounting / carrying the camera by this with heavy lenses - though with very heavy lenses you should probably not carry it by the body anyway.