Counting matching models…
Note: A larger version of this drone, able to fit a 20x20mm stack is available: The Goblin FPV Drone I worked hard on this little guy. Poured love into every edge and crevice. Spared no mechanical consideration. And what a beautiful…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Print. Fly. Crash. Repeat. Round 2! ----------------------- After the initial version has been out for some time now. It's time for some improvements, thanks to some feedback from the community I got rid of the click-in system and…
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these new alternative cosmetic parts for this blaster and its variants here (pictured below)…
Additional Hardware None. Great care was taken to make this model fully printable without any fasteners or glue. Print Settings Use your favourite print profile with a 0.4mm nozzle. For all parts, set the ‘ Seam position ’ to ‘Random’, to…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
The Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below. This list will also…
ATTENTION: This design is straight up antiquated guys. Unless you're a techno archeologist pick one: Imma leave this up because I'm not a historical revisionist but seriously, what are you still doing here? A performance optimized beast,…
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor. This was requested a lot on the other version and I redesigned the whole rover (although it looks the same) for this…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Let me be clear about one thing. I like drones. And I like printing them. It drives down costs, it makes parts easily replaceable, and it enables all a whole new kind of design philosophy. So I've certainly made a good few of them myself.…
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
Many parts of the drone are designed for PLA filament. The motor arms are designed for heat resistant filament (PETG, ABS, ASA). Assembly steps and details are shown in the video. Slicer settings are included in the part names. All…
Experimental monocoque 2" FPV Drone frame. This is a work in progress, I might remove outdated models inbetween. Current version features: top battery mount very crash resistant, depending on material (recommended: ASA, PCCF, mechanically…
LYNX DIY Blaster - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Nachdem ich bereits vor ein paar Wochen meine EU Version des CALIBURN 4 Blasters veröffentlicht…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots. The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a…
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
This is a cheap FPV gimbal for pan/tilt axis. This is designed around common servo, easily found in every online marketplace. The camera used is a old Eachine 1000TVL, but a found the exact same with a different brand. Adaptator for…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
Needs to be printed with a raft and without supports ! I used Greentec PRO and printed batches for 40 on a Voron V0, 90 Degrees Celsius Bed, 235 material. Likely works with PETG/PLA as well
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
This project is a custom-built foldable long-range FPV drone designed for efficient, extended flight times of up to 18 minutes. The frame is entirely 3D-printed and incorporates a unique folding mechanism for easy portability. The drone…
Corner Bracket for mounting Aqara FP2 Presence Sensor into a corner. You can use the metal plate and fix it with the screw or the 3M. I have print it with Prusament PETG on a Prusa MIni and 20% infill.
Print your very own FPV Drone (kind of)! It is just a model of a FPV Drone, not really for playing. It was designed as a giveaway for Maker Faire in GermanY Printing: Layer height: < 0.2 Supports: No Brim: No First Layer Speed: <25mm/s
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
I looked at a lot of frame reviews and tried to incorporate many design features that I liked into one drone frame. I recommend test printing it to see if your components will fit first as it is a fairly tight build. If slicing use the…
It's an open source design. Videos: https://youtube.com/playlist?list=PLgceMsQyNMfT9rvlGa_Ch6L50eUYFBX7_ Git reposistory: https://github.com/alessandroame/MFR Carbon frame version: https://www.printables.com/model/486129 My goal is to…
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
This is NOT the lighter "Air" frame (yet). This is the standard Pro edition, which can support up to 35mm props (but not HQprop as they are larger). Also keep in mind that the AIO mounting is 26mm and may not work with all whoop style…
Due to the large number of files, they are archived in zip format to preserve folder structure. Notes, Fixes, and things I forgot to include in this release. I forgot to include the decorative cab plating in the ScoutXL files. Please use…
I made my own versio on bottle bong with threads and it fits on regular soda bottle. I call it PuffPuff. There is 12,5mm hole that Top Puff base fits. There is three version so it is easy to print. Remember slow and steady. Peace and…
Hallo, es geht hier um ein sehr leichtes Drohnen Frame das für Freestyle und lange Flugzeiten entworfen wurde. Weil ich einfach nur Freestyle fliegen möchte habe ich mich für 3,5 Zoll Drohne entschieden. Die 3,5 Zoll Drohne versuche ich…
Case for the BetaFPV Air65 TinyWhoop
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
This is the Stingray designed by David Payne. Includes all kinds of parts and accessories. The DXF file is the cut file. Build out of Depron or Foam Board. The PDF files are also ready to print in A4 or US Letter and are provided as 1:1…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…
In diese Aufputzdose sollten alle unterputz Schalter und Steckdosen passen, die nicht tiefer als 34mm sind. Für größere Objekte kann das Modell mit gängiger Software einfach ein wenig "gestretcht" werden. Lochabstand ist 60mm Category:…
FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your DJI Osmo Action 3, 4, or 5 camera with the best mount in FPV! Max protection…
Case for the BetaFPV Air75 Tiny Whoop. The case has a modular design so it can be used for different battery numbers. The Case consists of the Case itself and a Lid to close it. Also a storage insert for four batteries (Lava 1S 450mAh)…
I’ve been wondering for a while: how small can you build a digital FPV drone that still records in 4K? For this project I used a DJI O4 Air Unit and stripped away everything that wasn’t absolutely necessary. The frame is designed so that…
Heavily inspired by these two models: https://www.thingiverse.com/thing:5374521 https://www.printables.com/model/62756-dji-fpv-battery-hub-holder This one includes also the googles battery slot and internal space to hide usb cable. Plenty…
Remix of Legion Go Controller adapter and 3d scanned right controller. Now you have both options with one stand you can take anywhere. Add 3 M4 screw to combine and 1 10x2mm magnet for properly FPS-mode work Also you can buy mouse glides
Can not be used by katcaps
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…
a cool halfpipe for all your tech deck needs
I recently designed a case for the MiSTer FPGA console and thought I would share it with you. It supports the standard USB HUB and either Digital IO board or Analog IO board. There are different top pieces for the IO boards. It has 3…
3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…
Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more. https://discord.gg/Ce9BJ2DK3j The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640…
so... more = better Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older d
Introducing our cutting-edge FPV drone designed for thrill-seekers. With a lightweight 6.5-inch 3D printed frame, it offers the perfect blend of durability and agility. The unique feature of versatile motor mounting holes, spaced 8-12mm…
Features: 2 Front mount USB ports Front mounted microSD card slot Console style power switch (loosely modeled after the PCEngine and TG16) Internal SATA HD easily accessible from the rear HDMI port Ethernet 3 more USB in the rear Serial…
Full Build Detailed in Youtube Video: (Parts list in video description)
I modeled some thumb-sticks for my Xbox one controller for Lift off; a FPV drone simulator. It has a 3mm screw hole in the mounts so if you want to make your own thumb-stick all you have to is make a thread 3-4mm deep thread to interface…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
# Printable TBS Source One V5 ## donate if you like…
If you don't have yet the real fpv controller you can start training in a flight simulator using the sticks and your ps 4 controller. It's not the perfect solution but it will do the works till you get a real controller. Print tips: no…
Hi, this is Robocat 270 quadcopter keychain, i made it to look like a real one ;), i hope u will like it. There are two versions, the one with antena have a hole where you can put a piece of 1,75mm filament to imitate antena, second one…
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
so... more = better \_(ツ)_/ Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older
Simple SFP beer case multiple varient available : SFP : 5x5 10x10 XFP/QSFP: 5x5 10x10 Copper SFP (more tick on top) : 5x5 10x10 QSFP DD (due to heatsink) : 5x5 10x50 more varient could be added as request. This project is freely inspired…
Countless hours spend poring over a screen into the small hours of the night. Many a cup coffee chugged. All so you could power trip while flying the 3d printed equivalent of a mosquito on steroids. Enjoy my friends, the majestic…
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 module. This design uses a Sunon 5015 blower fan ran at a low voltage (5v) from a USB-C trigger module. More info coming soon!
I tried to design an indestructible frame taking advantage of Prusa XL multi material print capabilities. My configuration: LIPO: 2S 450mah FC: Flywoo GOKU F405 HD 1-2S ELR AIO V2 Motors: HGLRC SPECTRE 1202.5 Motore Brushless 11000KV…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 4th and most sophisticated iteration. The design builds on my previous completely 3d printed frame NLR35. The goal was to make it lighter, more powerful and yet fully…
Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor. Wanted to be able to use it on my radio as the goggles done work with my eyes. Screen attaches with a standard ¼" tread 5/8" machine screw. See the attached…
More info: https://hackaday.io/project/25092-zerobot-raspberry-pi-zero-fpv-robot/log/97988-the-new-zerobot-pro How to get started 2018:…
BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…
Hi guys, welcome to my new Nanolongrange FPV drone design! This is the 3rd iteration, you may know the previous versions https://www.thingiverse.com/thing:4743497 and https://www.thingiverse.com/thing:4818009 This time, the design aim was…
UPDATE: I have now uploaded a 1 piece model (combined) as well, which is 230x75.6 so it can be printed on Prusa MK3/MK4. A 1 piece or 2 piece mount for VRS DFP controller box. I have printed the 2 piece edition with PETG on Prusa Mini and…
It's finally here. The new FPV-Rover V2.0 This is a remix of the drogerdy designed by timmiclark. http://www.thingiverse.com/thing:700835/#files Upgrade 01: http://www.thingiverse.com/thing:1269962 Upgrade 02:…
This is a Holder to hold the DJI FPV 3 Batteries and Hub. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: ESUN PETG Clear Notes: This is my first posting. Category: R/C…
A modular case to easily carry the BetaFPV Meteor75 Pro O4, batteries, and a few spare parts. Prevents squishing the drone when transporting it. Even if the battery holders can work with the standard case, I'd recommend choosing a cut…
Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
Simple corner mount for Aqara Presence FP2. Assembly Insert metal circular plate from Aqara Presence FP2 box (good enough fit, no glue necessary as it will be hold by magnet anyway) Glue double side 3M tape on areas touching the wall or…
Because dron lands on battery, i made a little protection cover for it. because it slides over a cable and on bottom is secured with battery feet it does not require any glue to stay in place. Print Settings Printer: Two trees saphire…
A lens cover to protect your DJI FPV goggles. Fits well into V1 and V2 of the FPV goggles. Print in TPU, doesn't matter
Aufputz Abzweigdose, Verteilerdose Deckel mit klick Verschluss.
All parts can be printed with PLA. Layer: 0.16 or 0.2 Infill: FullAll
Filament ABS Nylon Layer 0.2 Infill 15% Infill type Rectilinear Support + Support type Snug
A simple, small box for storing and safely transporting the Air65 drone and 10pcs LAVA 1S 300mah (260mah) batteries
Emblem of the United Federation of Planets This is the emblem of the United Federation of Planets (UFP), as known from the various Star Trek series. The version used is the most common one, which I am aware of, and was typically used in…
**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…
I designed this case to provide both protection for the Basys 3 board and to eliminate handling the lead solder joints. All of the I/O is easily accessible. The base has four 3.5mm tall standoffs to allow room for the solder joints & pins…
An easy to make speaker enclosure for a 40mm speaker. This speaker is often packed with the popular DFplayer MP3-player. The holes in the lid fit M3 countersunk screw. The holes in the box are tapped with an M3 tap. If you like my designs…
![BetaFPV C03 camera mount/canopy [Improved Complete Set]](https://media.printables.com/media/prints/5388c6c5-f443-476e-a91c-2cb185f211f6/images/11110340_e9dbe0a0-128d-4b63-b2fb-100d6291ac5f_1c42e2f3-7b8f-4de9-a9d5-c1a2f3042f00/screenshot-2025-11-08-212802.png)
