1 / 12
12V portable power bank (4S LFP 128 Wh) with USB charge/discharge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Outdoor power box for TRX and other USB device
- Rating
- 5 / 5
- Likes
- 383
- Downloads
- 682
- Makes
- 2
- Views
- 10,593
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Remix from original idea by OK1BT @yourmum_52499 TNX!
100W discharge test
BOM
- 4x LiFePo4 10Ah [1] or [2]
- Operate with terminal↑UP
- 3x short
- 8x M6 nuts
- 8x M6 cable eye
- 1x QC4.0 QC3.0 PD 5A 100W [1] or [2]
- IMPORTANT!
- Check if you have the correct type of battery protection chip BM3451BHDC-T28A on board, for LiFePo4

- Check the correct resistors values are used.
- The negative output voltage must be connected to Pin C- (underdischarge control, current protection)
- 1x DC jack
- 4x PowerPole terminal 30A
- 2x PowerPole black
- 2x PowerPole red
- 1x Fuse terminal
- 1x Fuse 30A
- 530g PETG black filament
- 0,5m FILAFLEX 60A
- 8x screw M3 x 30mm Allen head
- 4x screw M3 x 15mm Allen head
- some wires 1,5mm2 + 0,5mm2
