1 / 12
12V portable power bank (4S LFP 128 Wh) with USB charge/discharge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outdoor power box for TRX and other USB device
- Ocena
- 5 / 5
- Polubienia
- 383
- Pobrania
- 682
- Wydruki
- 2
- Wyświetlenia
- 10 593
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 7)Remiksy (0)Kolekcje (416)Powiązane
Remix from original idea by OK1BT @yourmum_52499 TNX!
100W discharge test
BOM
- 4x LiFePo4 10Ah [1] or [2]
- Operate with terminal↑UP
- 3x short
- 8x M6 nuts
- 8x M6 cable eye
- 1x QC4.0 QC3.0 PD 5A 100W [1] or [2]
- IMPORTANT!
- Check if you have the correct type of battery protection chip BM3451BHDC-T28A on board, for LiFePo4

- Check the correct resistors values are used.
- The negative output voltage must be connected to Pin C- (underdischarge control, current protection)
- 1x DC jack
- 4x PowerPole terminal 30A
- 2x PowerPole black
- 2x PowerPole red
- 1x Fuse terminal
- 1x Fuse 30A
- 530g PETG black filament
- 0,5m FILAFLEX 60A
- 8x screw M3 x 30mm Allen head
- 4x screw M3 x 15mm Allen head
- some wires 1,5mm2 + 0,5mm2
