Liczymy pasujące modele…
UPDATE! GET THE NEW VERSION HERE -Charger Cable Organizer 2nd edition- Due to many not reading the print instructions i've now put the instructions on top of the descriptions. PLEASE READ BEFORE PRINTING!! " Print instructions: Version 1…
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I had a side project needing a 20v source at a time when name brand chargers were unavailable except at scalper prices. The Elefly DCB112 solved the charging need very well for $20. But annoyingly and surprisingly it doesn't have a built…
The holder is for smartphones with width = 7.3 mm and thickness = 9 mm, such as the Huawei P30 Pro. The bracket can be attached to standard connectors. The variants differ in the position of the connection surfaces. Since the Brodit…
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
UPDATE: Updated to include a version for Juniper Model Ys and Highland Model 3s. I don't have either of those so I tested this on a rubber mat designed for those vehicles. ORIGINAL The camera bump outs on my iPhone14 were preventing the…
3s 18650 Battery Tray for QX7 Print Settings Resolution: .12 Infill: 100 **Filament:** Overture PLA Notes: I used the metal battery tabs from the stock AA qx7 battery tray to make this 18650 holder. In order to use this tray for both…
Hello everyone! As promised, I've finally designed and tested a new stand for Kiwi E-cigarette with holes for suit the cable for charge it! The model is very simple and minimalist, with compact dimension for tiny spaces. For insert the…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
OnePlus Smart Watch 2. Charger Stand, designed around an after market charger from Amazon, https://amzn.eu/d/i7fQQXG
Based on the 67W adapter, I made a new design to fit the smaller 70W adapter.
Small box used to put batt. charger electronics MRB045 for DIY installation of Lion bateries in old appliances working on 12V from ordinary USB charger . Same box can be used for same electronic board with other voltages-depends on number…
Stand to hold the Apple Original MagSafe Charger. There is a hole to eject the charger from the stand. 8 mm bumper pads can be glued into the four grooves to make the stand slip-resistant.
my take on fastcharge tp holder, no idea who is original mastermind behind the concept but credits go to him/her. you will need 4x m3x10 bolt for the assembly and 2x screw for mounting last picture is the recommended orientation for print.
Wireless Charger Stand. Galaxy PETG, 20% infill. Enjoy.
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
Wall holder for Jabra Evolve2 75 Wireless Charger
Enhance your Rabbit R1 AI Companion experience with this versatile MagSafe-compatible (must add mag ring) charging dock and stand. Designed for both functionality and portability, this dock securely holds the Rabbit R1 while aligning…
This wall mount is designed to accommodate the Samsung S23 Ultra with a phone case, but it also fits a range of other devices, such as the Samsung S10 (as shown in the third image). The mount allows for both horizontal and vertical…
This model was designed in the Fusion360 program! The model itself is made in excellent quality, but since it was printed in a small size, it is not very high quality.
This is Baseus 100w charger holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made .
Charged batteries have the positive pole facing up, empty batteries have the negative pole facing up. With this you can know the state of the each battery.
Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle and support needed
a magsafe charging dock, i printed it in pla and the charger is the common round wireless charger found on ali express link for the charger I used: https://a.aliexpress.com/_onyjXzM Recommend tree support I've included several versions…
Paw print magsafe dock. The Paw is held onto the stand like a peg hook. I printed the paw with 5% infill, and the stand was printed on default settings
Thats a Standcharger for the Xiaomi Redmi watch aktive 5 that i bought recently. If you remix pls tag me.
Inspired by the original model from Scott Yu-Jan in Maker World.
I have a Samsung galaxy watch 5 and I was bored of having the charger next to my bed and almost always lying on the floor. I have seen that there were several models that could fit what I needed, but I thought about designing my own and…
upd: untested for Galaxy S25, but come on, it's the same format as Galaxy S23 Use Magsafe charger from Apple. Assemble with two M3x8 screws. I added two GOST 11371-78 washers to make the hinge more strong and prevent the screws from…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 ... 100
Printed with PLA on Bambulab A1 mini with 0.4mm nozzle. Snap-fit securely holds the charger and attaches well to the Skadis board. If it doesn't fit as expected, I can provide model with a bit different/bigger tolerances.
iPhone car cupholder revised to allow access to side buttons and larger base bottom for better fit.
The hook keeps the door of the charging port of your ID.4 a little less wide open when charging. This protects the door better from accidental damage, such as breaking off because it was too wide open. There are two versions. One for…
Simple bracket for the Shimano Charger so it can be mounted on a wall. Made to fitt the EC-E6002 Charger Printed with 4 wall loops and 25% infill.…
I mounted mine to the side of my garage cabinet, and I only had 1 hole to use! Remixed from model from User named Bukken. 10mm through hole, and can be reached through the hex pattern. I printed white to match my garage cabinet too… :-) I…
The ultimate skadis mount for your Einhell PXC charger. In contrast to other models it uses the universal hooks of CSD_Salzburg and they are placed quite at the top, which allows to take the holder down without needing to break anything.…
The case accommodates two 18650 cells connected in parallel and incorporates a TP4056 module for charging. A JST-XH connector serves as the output interface. Assembly Instructions: Place the 18650 cells into the holder and connect them in…
6 Bay Charge Stand for Blue USB chargers for Olight Flashlights. Recommend 18 10x3 mm Magnets . When inserting magnets ensure polarity is attracting base of flashlight. Base polarity should be same as inserted magnets.
# UGREEN CD328 Nexode PD Charger Under-Desk Mount ## Overview This is a 3D printable mount designed to attach your UGREEN CD328 Nexode PD Charger under a desk or table. The mount helps keep your workspace clean and organized by moving the…
Topvork 6 port USB charger 60W holder mount two screws 40mm apart. Charger size 69mm x 30mm. No supports needed, print as pictured.
Dell 130W charger holder for vertical or horizontal mount. No needs for support. Charger model HA130PM130. Dell models: Xps 15 9530 9550 9560 9570 7590 Precision 5530 5510 5540 Do you like my models? Consider buying me a coffee .
This is a Multiboard hanger for Ryobi battery chargers that have holes spaced 114mm apart. You will need small thread T-Bolts to attach to Multiboard. 2/1/2025 - Uploaded Version 2. Has longer pegs so that it fits snug, but not too snug…
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
I did 5% infill with no issues with elegoo's pla+.
Qi charger 56mm diameter, 5.2mm height. Fits larger phones.
This holder is designed to hold the Bosch 4A Standard battery charger for eBikes. It features a cutout at the bottom to route the power cable as well as little standoff feet so it can be mounted on top of surface-mounted cables.
For HONDA CBF600S, maybe for other HONDA motorbikes USB charger holder: https://www.aliexpress.com/item/1005005677210208.html?spm=a2g0o.order_list.order_list Holder for gear indicator:…
This dock enables secure charging of the Peregrine dive computer by securing the charger with the silicone strap. No more careful balancing that might topple over in the night. The dock can also store the 2 screwdrivers needed to service…
Device that holds on to your smartphone while charging. Low support on one side for easy access to yout phone while charging. If you prefer acces on the left side it can easily be mirrored in the slicer. Inside measurements: W: 79mm H:…
This housing is designed to provide environmental shielding while remaining easily accessible. It’s spacious enough to accommodate charging cables with additional protection—like the one I use. It's not intended to be fully weatherproof;…
Charge controller mount for use in universal plastic enclosures with plastic grid mounting plates. Mount the controller using 2.5mm x 4mm button head hex screws. 3mm x 6mm button head hex screws to mount it to the mounting plate. Version…
a loop to replace tape or fastener to keep the batteries stay in the GoPro Dual Battery Charger . I need to charge the battery during riding. it helps keep the batteries falling out of the charger.
The model is a holder for a wireless charger for the iPhone XS. Thanks to it, my children can place their phones down be
Impression en PETG - hauteur de couches 0.24 - 5 couches sup et inf - 10% de remplissage Gyroïde - pas de support
I needed a desk organiser to tidy up my lithium battery chargers and cables. Quick and easy to make with the Maker World MakerLab tool.
This MagSafe Headphone Stand with Wireless Charging is a sleek and functional accessory for your desk or gaming setup. It provides a dedicated place to store your headphones while keeping your MagSafe charger integrated into the design…
Honeycomb wall compatible holder for airpod pro case with integrated charging cable. Designed with the dimensions for my USBc to lightning cable. Cable slots in upward from the bottom through an oversized hole, then press fits downward…
Tired of having a single cap for each battery state? Here's a 3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it should fit a normal XT60 connector.
I have modified the parametric files provided by @Marlfox_1264389 to work with this 3rd party charger that's cheaper than the original magsafe charger. To my best knowledge, the Ambrane Aerosync charger is only available in India; so if…
The 3/4" cable version was made by request and I am not 100% sure what charger it was for and had limited follow-up I am tempted to just take it off, for the moment I am pointing people to description. It has a large profile and cable…
Affiliate links for my favorite filaments to help support what I do are here: Linktree When I got my iPhone 16 I found that with a case it would not fit in the Qi Charging slot. 3D printing and some modeling came to the rescue so I was…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
For more information see my blog post about this setup. A sleeve that you are meant to mount the 21700 cell holders to (I used VHS tape) that slides over the 18650 cell holders Triangle pieces that are meant to be mounted to the back of…
This model is designed to take a USB C port for a detachable cable. A version is available with an opening for a regular USB port for the wireless dongle. Uses two M3 bolts as contacts, make sure your bolts are attracted to magnets and…
This is a case for the ViFly WoopStor 3. It keep is protected and organised. It has a hinge that moves the top over the WoopStor 3. There is also a snap clip to close it.
This custom-designed wireless charger mount is perfect for Audi A5 and A4 models from 2016 to 2024. It is compatible with the OnePlus AIRVOOC 50W Magnetic Charger , making it ideal for OnePlus 12 and 13 phones with MagSafe ring covers.…
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
A gridfinity base for Anker's MagGo 2-in-1 charger that I made for my nightstand.
These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack). Features… - Space for two GT home chargers - Cooling channels around the chargers - 40mm…
The original model already have extensive build instructions in it's description. This remix was just changed to fit the charger board you can find in the link below. PD65W Fast Charging Module Type-C USB Interface Supports PD3.1 QC3.0…
I was inspired by this video: For the X12, the converter board did not fit in the enclosure. Set the converter to 12.9V out. Weather you want to use the low voltage cut out depends on your use case. I set mine to 10V. Set the out put…
Printed laying on its side with the port for the USB pug facing up. No supports needed.
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
Quick remix of the base for this wireless charger stand.
Use the universal Pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg
I kept losing track of which of my rechargeable batteries were dead and which ones were freshly charged. Threw together a simple organizer with printable icons, can be printed with minimal supports. Print the icons at 100% scale for a…
Update 12/20/2025: Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only). Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable. I designed my own version…
3D model description 📢 For commercial use, join our Patreon at: 👉 www.patreon.com/PrintForgeAU ONLY $10 per month! Keep your Milwaukee M12 batteries and charger neatly organized, secure, and easily trackable with this custom-designed…
I designed a simple Snorlax frame for my phone charger. The unit is designed for a large charging pad that I sourced from Amazon. If you have a different charger, I included an insert that is sized for the 56mm magnetic chargers. The…
I have pegboard attached to the back of my entertainment center and I designed a holder for this usb charger that powers everything on the entertainment center. Designed around this usb bank specifically, but should work for others within…
A holder to mount your Yarbo core charger to the wall. Print upright, no support needed.
This model is a remake to fit the charger of the Yamaha Moro-07 E-bike. Print upright, no support needed.
This is a compact and practical storage box designed for 7 CR425 batteries plus one USB charger . Perfect for anglers and hobbyists who use these small cylindrical batteries in electronic fishing floats, LED lights, or other compact…
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
Charge well with groove and matching cap. The ¾" size has integrated WAGO 221 terminals arranged to fit on the 2.6" dia bulkhead of a Punisher 2.6. Mounting is with a single hole in the bottom for a #6 100deg countersunk screw. The charge…
A clean MagSafe desk charger inspired by the Apple Mac Mini. The MagSafe puck sits in the center so your phone lies flat — keeping it out of sight and reducing distractions while you work. Two versions included: Freestanding – a simple,…
Friend's ebike charge port cover broke off the thin rubber tether (common issue) and he was worried the whole thing would fall off without the tether. This is a smaller cap that slides into the port to keep dust out. Printed in TPU for…
This is a holder and charger designed for a laifen wave toothbrush. All you need to do is thread the charger it comes with through the top and out the bottom.
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
Designed for https://www.aliexpress.com/item/1005008935292509.html Just something quickly thrown together to hold a generic USB adapter set in a box to stop me losing any of the bits into my drawers. Holds the bits and cord from…
Added multiboard push-fit pins to the charger wall mount model from D.McReynolds
