1 / 1
Wallmount for charger of Vanmoof S2/S3 — zdjęcie 1

Wallmount for charger of Vanmoof S2/S3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount.

Ocena
5 / 5
Polubienia
6
Pobrania
92
Wydruki
2
Wyświetlenia
338
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount.

Printing

Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings:

Nozzle Dia: 0.4 or multiples

Layer Height: 0.15 - 0.2

Infill: 20-25%

Supports: No

Raft: No

Brim: No

Mounting

Bolt the wallmount to any suitable wall using four screws with a diameter of up to 4mm.

Using

Store your charger vertically inside of the wallmount and use the small hook on the right side to quickly put away your charge-cable after charging.

 

 

Click the Like button above if you found this print helpful. 

If you want to support my work feel free to buy me a coffee using the Donate-Button next to my username on the top of the page.

 

Tagi