Wallmount for charger of Vanmoof S2/S3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount.
Printing
Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings:
Nozzle Dia: 0.4 or multiples
Layer Height: 0.15 - 0.2
Infill: 20-25%
Supports: No
Raft: No
Brim: No
Mounting
Bolt the wallmount to any suitable wall using four screws with a diameter of up to 4mm.
Using
Store your charger vertically inside of the wallmount and use the small hook on the right side to quickly put away your charge-cable after charging.
Click the Like button above if you found this print helpful.
If you want to support my work feel free to buy me a coffee using the Donate-Button next to my username on the top of the page.