Counting matching models…
This is a replacement for the dust cap on the bolt that attaches the crank arm to a VanMoof S3/X3. Mine fell off while riding so I designed and printed a new one based on the original (from the opposite crank arm). Since this is a…
Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount. Printing Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings: Nozzle Dia:…
More information can be found on JOGL: https://app.jogl.io/project/1879/RepairsforVanmoofbikes
I used to print them in PETG, upright like imported and support only from buildplate. Made to attach to a metal pipe with an outer diameter of 15mm and an inner diameter of 1mm. If you need a version for a different pipe just let me know…
A direct-fit, 3D-printable drop-in replacement for the Vanmoof S3 battery’s rear endcap—ideal whenever the original cap’s handle retainer or heat-set insert breaks off. 🔧 Key Features Exact fit for Vanmoof S3 battery housing, using the…
The cap for my VanMoof S3's Kick Lock fell off while riding, so I designed this replacement while waiting for them to send me a new one. To install: Disable your bike's alarm in the app Place the bike upside-down Engage the Kick Lock in…
This is a custom-designed drink holder made specifically for the VanMoof S3 e-bike. It fits the frame perfectly and does not require any drilling or permanent modifications. The holder is attached using three zip ties and a bit of…
Dieser Reflektor basiert auf dem genialen Design von F. Weinmann und wurde nur minimal abgeändert: Gesamtes Modell wurde etwas gekürzt, damit es nicht übersteht Das Loch, in das der Reflektor einklickt, wurde etwas geweitet Eine…
Nice little accessory that clips over the buttons and around the handlebars of the VanMoof S3 / X3. Made by Voxel3D, and co-developed with Vanmoof in 2024! The cover prevents water from getting into the button electronics, which can cause…
New generation of my water-resistant cover that significantly reduces the risk of water entering the buttons. This can otherwise cause the well-known error codes 40 and 41, often leading to malfunctioning buttons. Perfect for all Moofers…
Beautiful 3D print to mount an SP Connect Plus (SPC+) bracket on the handlebar of your VanMoof S3/X3! This allows you to use your phone as a dashboard, turn on navigation, or control your media/music! My design uses an original, metal SPC…
Nice little accessory that clips over the buttons and around the handlebars of the VanMoof S5 / A5. Made by Voxel3D, and co-developed with Vanmoof in 2024! The cover prevents water from getting into the button electronics, which can cause…
No more cables and charger blocks on the floor? With this wall mount, you can neatly store your VanMoof S3 or X3 charger on the wall. The holder is sleekly designed and firmly 3D-printed in PLA. The indicator LED remains visible, and it…
No more cables and charger blocks on the floor? With this wall mount, you can neatly store your VanMoof S3 or X3 charger on the wall. The holder is sleekly designed and firmly 3D-printed in PLA. The indicator LED remains visible, and it…
Replacement cap for Vanmoof S3 or X3 kicklock cap. Uses a single M6 nut. Find my complete collection of VanMoof co-developed accessories here
Diese Adapterplatte habe ich vor ein paar Jahren konstruiert um KlickFix kompatible Körbe, Taschen etc. an meinem VanMoof S3 Gepäckträger befestigen zu können. Dazu muss eine original KlickFix Halterung für den Lenker gerade abgesägt…
A simple frame so add a reflector on the VanMoof rear rack (light version) Category: Vehicles
Overview Vanmoof S3 E-shifter 3D printed replacement - BUTIM Shifter! Each gear needs about 30° of rotation. You need any shifter where cable travels 2.8 mm per click. For example, Shimano Revoshift 6-speed shifter pull ~2.8 mm of cable…
Vanmoof s2 smart backlight replacement. need to add an led plate yourself.
Use these stands to put your VanMoof upside down without damaging the handlebars. I've included multiple versions: Simple: Print the whole thing in TPU. Overengineered but better looking: print the base in any material you want. The…
Remixed model of manimi94's model for the chain guard for VanMoof bicycles. Made the part a bit more durable, more printable (no steep overhang) and made the lock indicator more versatile by marking the whole lock zone instead of a small…
Reflector-mount with a build-in Airtag for the Vanmoof S3 series. What you need: 1x Reflector (every design with a bolt-distance of 50mm should fit) 1x Airtag 4x Heat-set inserts M2x4x3.6 4x Cylinder-head screws M4x6 Your Vanmoof S3…
If you want to repare your socket on a vanmoof x3 you have to push the socket inside your frame. You can try without, but if you want to do the job quick and easy try my new tool ;) The installation is easy, just put in on the broom and…
This is a replacement for the dust cap on the bolt that attaches the crank arm to a VanMoof S3/X3. Mine fell off while riding so I designed and printed a new one based on the original (from the opposite crank arm). Since this is a…
Modified S2 battery cover to contain a vanspoof module on a vanmoof S3. Looks very clean, and the e-shifter module is completely removed. I am very much a novice so this model is pretty crude, but it works. I printed in polymaker…
A solution to mount unstable panniers to the wall and free up some room. I personally used an extra piece of wood to prevent having to drill 8 holes in the wall but it is not mandatory. I have not tested the mounts under load as I only…
Update: This should also fit the S5, I've updated the title accordingly. New rotating Phone Mount for the Van Moof S2/S3/S5 electric bikes. Mounts to the handlebar using 3 cable-ties, magnets embedded in the handlebar-base will help keep…
I made this simple SP Connect Phone mount for the Vanmoof S3 Bike. It attaches to the handlebar using 2 M4x20 bolts and 2 M4 nuts. I recommend printing it out of PETG or similar with relatively high infill (40%+). Print on its side so no…
Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount. Printing Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings: Nozzle Dia:…
I own a VanMoof M1 (the first model) bike. The bike contained 2 bike light that can be charged by the sun . Since my bike is stored indoors most of the time they were always empty. I've designed these holder to contain 2 cheap lights from…
The Hafny FR01 Mirror fits handlebars between 21-26mm, but the Vanmoof S3 handlebars are 30mm; so I designed a simple clamp for this mirror to fit on my bike. It's intended to be used with two M6 bolts and brass threaded inserts. It's not…
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
A holder to fasten to a wall, in wich you can place your VANMOOF's E-bike charger of the type S3 X3. It has the VANMOOF name/logo on it wich can be collored. (used black PLA as base and grey PLA for name/logo.)
This model is a practical remix of a wall mount designed for the VanMoof S2 E-Bike charger. The wall mount has been extended with an additional holder for the Xiaomi Aircompressor, ensuring that you always have the essential tools for…
More information can be found on JOGL: https://app.jogl.io/project/1879/RepairsforVanmoofbikes
This may be used as a replacement for the Vanmoof S2s Smart-Cartridge housing in case yours is broken or split apart. Or it might be used with your own DIY controller for the bike, now that VM is no longer. I've omitted the internal…
Should be a pretty accurate model of the rear light of the Vanmoof S2/S3. Now that Vanmoof is bankrupt we'll have to organize our spareparts for the bike by ourselves. So in case your rear light breaks, you may use this model to print a…
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar. I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road. Printing: These…
A wall mount for the charger of an Elops 120E eBike. I have added the STP file so it can be modded to fit chargers of all brands, like Bosch or VanMoof. I would recommend using PETG as PLA tends to sag with constant stress and heat.…
This is a Vanmoof charger holder for an IKEA Skadis wall. This means that the charger is not lying around somewhere and is always tidy. The hooks have to be printed twice. PLA is completely sufficient for a dry, sun-protected room. For…
This is a kick lock cap for the VanMoof, to avoid triggering the lock when the bike is stored indoors or is in for a repair. The cap is a friction fit and simply clips over the lock. The cap has been tested on both an X3 and S3. The fit…
After my bikes cable harness failed I took the opportunity to recreate these parts of the front-fork mounting system. These parts are meant as a reference for others who might want to see what the mounting system looks like. DISCLAIMER:…
My vanMoof S3 bike comes with a big PSU for charging the bike. With this 3D model you can fix the adapter to the wall. I used 0.25 and PLA for this model and created it on my Prusa Mini.
Button: https://www.mouser.com/ProductDetail/642-IPR1SAD2
holder to attach the lock to the luggage rack of a vanmoof s3 (maybe also S2). It consists of a lower and upper shell that can be fixed with cable ties. But this is not necessary because the lock also holds the two halves together. i used…
Here in the Netherlands people transport all sorts of stuff on their bikes. Including their beer. Usually this is done by setting the crate on the rear bike rack and holding it with one hand. I designed a way to do it hands free. As the…
Remix of the Vanmoof/Ortlieb Pannier Bag Wall Mount by PjotrStrog to hang bicycle bags on a Multiboard or a Honeycomb (HSW). You need two MultiConnect connectors, e.g. Multiconnect - Board connectors_Multiboard big, laying down ,…
For the Vanmoof S3 bike, there are spacers available for the handlebars to adjust the height. I have designed and modified these spacers to include a mount for an action camera. In the pictures, you can see the mount holding a DJI Action…
This model provides a mount for the Garmin Varia Radar, specifically designed to attach the radar to the rear rack of a VanMoof bike. To install, remove the two screws from the original Garmin mount and use them to attach the radar to the…
This model is a mount designed for attaching Lumos Firefly lights to the Vanmoof S3. The mount improves the visibility of the lights and enhances road illumination. There are two variants of the model: one for the front and one for the…
This is the plastic piece that goes inside the frame, where the headlight originally is. You'll know if you need it. I printed mine out of PLA, but you should probably print it with something like PETG or ABS. It uses a single M8 nut.
This cradle lets you organize your Vanmoof S3 toolkit, in the gridfinity universe.
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
