Handlebar adjustment ring for Vanmoof S3
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.06 – €1.30 net (excluding VAT)
For file: vanmoof_S3_handlebar_adjustment_no_logo_0.15mm_PLA_MK3S_1h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.18 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adjust your Vanmoof bikes handlebar height with these handy adjustment rings modeled after the originals.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 74
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use these simple adjustment rings to change the height of your Vanmoof S3s handlebar.
I've modeled these closely resembling the original parts of the, now defunct/bankrupt, Vanmoof, in order to keep more bikes on the road.
Printing:
These parts should not be load-bearing since the handlebar is fastened using two screws that clamp it against the steering column. They are only meant to cover the exposed steering column in case of a raised handlebar. So printing at 25% infill should be more than enough.