1 / 16
Charging butler / iPhone + Watch + AirPods Pro wall mount charger — zdjęcie 1
1 / 16

Charging butler / iPhone + Watch + AirPods Pro wall mount charger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

2,61 € – 3,19 € netto (bez VAT)

Dla pliku: Lid_0.4n_0.2mm_PLA_MK3S_2h35m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 2,90 € netto (środek widełek).

Masa podana przez autora
43 g
Czas druku podany przez autora
2,58 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Charging butler / Apple iPhone, Watch, AirPods Pro wall mount charger with Apple Standby Mode support in iOS 17.

Ocena
5 / 5
Polubienia
38
Pobrania
165
Wydruki
3
Wyświetlenia
2105
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Charging butler /  Apple iPhone, Watch, AirPods Pro wall mount charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to have 1 visible cable on the wall only for a cleaner look... 


When charging these 3 different devices you usually end up like this:

3 chargers, lots of visible cables and the usual tangled cables…

 

Using such a combined charger with 3 or 4 outputs will help to reduce the amount of chargers to deal with already, but you still have all the cables with all their downsides…


So why not put all this stuff in a case to hide the cables?

Well, this is my solution, because I wanted a clean look on my wall charger and i wanted to be able not only to charge the iPhone and Watch… I wanted to have a dock to put the AirPods Pro too…

PS: Works with stiffer and thicker wristbands too. =)


While designing this holder I thought that it looks like a little human that spreads its arms… So the idea to make a butler out of it was born, because the holder will serve you as a charging butler… Hope you like it. =)

 

The iPhone can be used in regular position or rotated 90° to be used in the new “Standby mode” of iOS 17.


The holder is large enough for an iPhone 14/15 Pro MAX + Apple Watch + Apple AirPods and all devices can be charged at once with good speed due to the good power supply. All cables are hidden inside the case.

 

Parts needed:

 

Mounting the parts:

  1. Mount the Lid part to the wall. The 3 screw holes in the lid have a 7.5mm diameter.
  2. Route the Lightning cable from the inside to the right arm and press it in place.
  3. Press the iPhone MagSafe into the Holder part and route the cable to the inside.
  4. Press the Apple Watch charger into the Holder part and route the cable to the inside.
  5. Connect the USB cables into the charger and route the cables inside the case to save space.
  6. Connect the power cable into the charger through the hole in the bottom.
  7. Press the Holder part onto the Lid part and secure it in place with the 4x M3 screws.
  8. Attach the power cable to your mains source.
  9. Enjoy =)

 

Printing instructions:

  • 0.2 speed profile
  • Supports from the print bed for the holder part
  • Textured sheet used
  • Color change used at 1mm and 2mm to get the butler look =)

 

Happy printing =)

Tagi