Counting matching models…
Powerbank 21000 mAh with 18650 Li-Ion batteries. Part list: powerbank modul SW6208 (power rating of 22.5W) 6 Samsung INR18650-35E (6x3500 mAh) 2 screws M2x10 (for housing) 2 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the…
My design of powerbank based on chinese pcb and 1s8p pack from my previous powerbank. Main body is designed to be printed standing with display hole on top. To fix parts together you need 4-6 m3 screws with cone head.
Un chargeur portable puissant et pratique, parfait pour les urgences ou les déplacements. Nous avons utilisé une batterie 18650, choisie pour sa capacité élevée (jusqu'à 3000 mAh) et sa disponibilité. Ce chargeur peut alimenter…
Update 2024/11/01: Added some new file versions for coarse or regular M3 size screws without requiring heatsets. Update 23/11/06: Added “Rev2” versions of interface, shell, and cap files. These are mostly minor updates to clean up the…
Fix the toroidal inductor with hot glue so that the adapter can withstand vibrations. 2x USB-C Charger PCB with SW3518 Chip: https://de.aliexpress.com/item/4000180424469.html Includes a buck (no boost) converter, so USB-C fast charging…
Printer Bambu Lab X1 Carbon PET-G, 0.4 nozzle, 0.20mm layer, 2/3 walls, 15% infill Parts are glued together for strength. USB print, search for “Led Dual Usb 5V 2.4A Micro/Type-C Usb” on aliexpress. Update, 6 aug 2023, V1.1 : Modified…
Remix of the famous “Rugged Box (Parametric)” by @Withy. I made this box to accommodate the ANKER737 powerbank and some charging cables. Changed the dimension accordingly and added the Logo on the lid as well as an Inset. The Inset fits…
A case for a power bank control board that fits 17x 18650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast charging, 1x…
ATTENTION: Strictly avoid short circuit and wrong polarity !!! Part list: DIY powerbank modul 2.4A (e.g. from ebay) 4 Samsung INR21700-50E (21700, 5000 mAh) 4 hex screws M3 x 6 4 insert nuts M3 x D4 x L5 1 m flexible cable 0,75 - 1 mm² 2…
A simple power bank with bought PCB and 2170 cells. I used the BAK N21700CG and LG M50 cells and a BMS/PCM PCB from Aliexpress (search term: QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650). There were also…
Another powerbank case for a popular module from Aliexpress. It is designed to be printed without supports with 0.2mm layer height. Requires 2 M3x10 countersunk screws and 2 M3x12 hex head screws. The screws goes directly into plastic.…
Deutsch: Makita Powerbank. Es sind zwei Komponenten zu drucken, dann braucht man noch folgendes Teil: https://a.aliexpress.com/_mLn0LaO https://amzn.eu/d/fXhVGst Englisch: Makita power bank. There are two components to print, then you…
Many people around me use disposable devices that contain small lithium-ion batteries. It occurred to me to recycle them by turning them into small power banks. All that's needed is two battery wires and a module (5V Boost Converter…
Powerbank 12800 mAh with 18650 Li-Ion batteries. Size 100x42x42mm Part list: powerbank modul IP5310 (LX-LBC 3.1) 3.1A (1 or 2 usb) 4 Samsung INR18650-32E (4x3200 mAh) 4 screws M2x12 silicone cable AWG18 silicone glue Advice: Fix the…
Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…
Powerbank built on STEP UP 5V 2A Li-ion USB-C and 2x lion 18650 3.6V batteries and with LEDs indicating the level of charge on the side of the case. needed: - STEP UP 5V 2A Li-ion USB-C https://pl.aliexpress.com/item/1005003104542176.html…
Под печать соплом 0.4мм, слой 0.2мм. Можно любым в принципе, но отсеки для светодиодов могут не пропечататься при использовании более крупного сопла (подбирать ширину лини придется). Печатал из АБС, сопло 0.4мм, слой 0.2мм, клеил…
Holder for three Xiaomi 10000mAh or two Xiaomi 20000mAh (or similar) power banks. The holder can be mounted under the top side of the shelf or on the side of the shelf with four flat-head screws (3.5mm hole). The inner dimensions of the…
This is a simple case for a powerful powerbank module from Aliexpress and 5S 21700 battery. The assembly requires 4 small screws. The model is designed in FreeCAD. The source file is included. The supports might be needed for the screw…
A simple box for an powerbank using H961-U (aka M-961) module charger and four 18650 lithium battery: No screws required Three parts to print: Box bottom Box top Button
Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.
This is Brakka, the modular powerbank project. It is still under development but the first working prototype is here. It is designed with two swappable 18650 cells to give it a “reloading a break-action double barrel shotgun” feeling. The…
I had a power bank for a 18650 battery. After I had inserted the battery incorrectly and thereby the electronics burned out, I wanted to replace these. The spare part that I ordered, but did not fit. That's why I decided to design and…
The case was originally design to be printed standing, with TPU 95A, it could work without supports depending on material and printer. Choice of 2 thicknesses: 1mm or 2mm Inside section: 50,90x58,2mm Do not hesitate to leave your feedback…
For the Baseus Adaman Powerbank (PPADM65 20,000mah) v1.1 fixes some double geometry that was present in the original model. Slightly increased tolerances, which should make it grip the Steamdeck and the Powerbank better. Inspired by…
The case is suitable for assembling 5S2P and anything smaller. Total 5 parts 1 - Outer case 2 - Substrate for mounting the board 3 - Back cover 4 - Front cover 5 - Rib/separation of the board and batteries (can be fixed with glue) For…
Ich habe eine Military Powerbank designend welche genau in eine Munitionskiste Gr.1 des US-Militärs passt. Daher leitet sich auch der Name ab. Ich wollte sowohl eine Powerbank als auch ein mobiles Labornetzgerät haben welche auch noch…
This is an adapter box to turn your Bosch 18 V battery into a powerbank, or a lab power supply! Using edge connectors that snap into the housing, a cheap 4 x USB step-down-converter module and an automotive fuse, you can use your existing…
Part list: powerbank modul IP5310 (LX-LBC 3.1) 3.1A 4 Samsung INR21700-50E (4x5000 mAh) 4 screws M2x12 silicone cable AWG18 silicone glue Advice: Fix the module board with glue Fix the battery with glue to the body of the powerbank…
capacity of this powerbank depends on what tipe of the 18650 cells are you useing i used 8x 2000mah batteries so my powerbank have 16000mah. Guide: if you are useing recicled battery cells make sure you balance them to the same voltage.…
Box for Anker 140W PowerBank with 4 latches to fit perfectly inside
This is a DIY powerbank built from a Nexus 7 battery and a powerbank circuit from https://www.aliexpress.com/item/33046467419.html The board is held in place using hot glue, the battery using a strip of double sided tape. Top and bottom…
40135 BATTERIES CASING (UPS, Powerstation, Powerbank, Charger, with BMS) 4-8 BATTERIES. 12-24V (20 000 mAh*24V = 100 000mAh*4.5v) (tested on EVE C40 40135) The casing can be assembled with threaded studs (2*6mm studs) or using cable ties…
I created a protective and carrying case for the Baseus 65W / 20000 model power bank Be careful to use it at high temperatures, since the power bank has a dissipating metal body it can heat up a lot in summer when it recharges quickly.…
Found a compact powerbank module on aliexpress. its a smaller 22.5w version compared to the rest. As I wanted a more pocketable powerbank with more amps. Installation instructions: installation is pretty straight forward. there is a top…
As of this moment, because of the very snug design, the case I'm holding is pretty much permanent from my experience. Printed flawlessly without any stringing with Bambu's TPU 95A HF in just 2h35min A version with a hole at the bottom,…
I needed a power bank case for my salvaged 18650 batteries. The module I used is in the link below. 5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,…
A powerbank case suitable to use with a rectangular cell.
The idea of PET-BANK is to demonstrate that even seemingly useless garbage such as Li-Ion batteries deserve the second chance. And to make it even better, these were printed out of 100% recycled filament made of old PET bottles. So,…
Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made. Remix it on Onshape:…
Material: PLA Infill: 15 % Schichthöhe: 0,2 mm Halter für Powerbank. Befestigung durch M3 Schrauben oder doppelseitigem Klebeband. Für eine Powerbank mit dem Maßen 64 x 22 mm (BxT). Material: PLA Infill: 15% Layer height: 0.2 mm Power…
powerbank box with one slim battery and four 18650. you can edit or your different batteries.
Part list: powerbank modul SW6208 (power rating of 22.5W) 4 INR21700 (4x5000 mAh) 2 screws M2x10 (for housing) 3 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the module board screws M2x5 Fix the housing with screws M2x10 Fix…
Battery charger module : https://fr.aliexpress.com/item/4000002707262.html?spm=a2g0o.order_list.0.0.475d5e5brWhS0Q&gatewayAdapt=glo2fra
Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…
With this vertical case you can operate your Insta360 One R directly with a powerbank. You can leave out the battery. This enables an even slimmer shape. As in the original design you can use a piece of filament as an axis pin. Just cut a…
for English see below Wer hat nicht schon mal probiert eine Fahrradlampe oder ein anderes elektrisches Gerät mit einem einfachen 2 Draht USB C Kabel Adapter oder mit einem aufgeschnittenen USB C Kabel mit Spannung zu versorgen. Die…
Has 4 slots for phones, tablets, powerbanks and so on. Has 2 longer wall slots for tablets at the back. The depth of each slot is about 21mm. Shorter walls height of 20mm. Longer walls height of 50mm. Width 120mm. Simple design, printed…
The IP5328P can be installed facing up or upside down (see "ud" in the filename), which makes it slightly smaller. The version with the IP5328P facing upwards is easier to install overall, but please note the picture showing the cable…
18650 powerbank / fieldbattery case using spring contact terminals. With this solution, you don't have to solder your li-ion cells and risk damaging them. If later some cells go bad you can replace them, which is difficult when soldered…
Designed this powerbank for a power bank module that supports fast charging. Spoiler the module sucks or I am doing something wrong, my samsung phone refuses to fast charge and so does my huawei. But just in case someone else has this…
A simple way to recycle some disposable vapes and use batteries from them. You need only two M2x4mm screws and powerbank module you can buy it on amazon. https://www.amazon.com/Converter-Step-Up-Lithium-Charging-Protection/dp/B09GHT9MC2…
По просьбе разработал на 2шт 18650 Под печать соплом 0.4мм, слой 0.2мм. Можно любым в принципе, но отсеки для светодиодов могут не пропечататься при использовании более крупного сопла (подбирать ширину лини придется). Модуль крепится к…
This print combines one of the cheap Powerbank modules with a single 18650 cell. The modules are readily available on eBay and the likes when searching for “Powerbank module" for like 1…2 Euros. It's just two wires soldered to the module;…
Started with the model at https://www.thingiverse.com/thing:5877532 Adjusted it to better fit my battery and then to suit a slightly modified USB top from…
I designed this modular powerbank holder to attach my Baseus 65W powerbank to the legs of a standard Manfrotto tripod and power the camera in long sessions. I made it modular so you can leave the brace attached to the leg when stored…
I would recommend petg as a material and about 40% infill
A simple power bank. It is about 17 cm long with 14.5 cm of space available for batteries. it has a width of 7 cm. the screws i used have a diameter of 4 mm and are 5mm long. Here is the board i bought: https://a.co/d/bPLvjpo Build…
A 4x1 gridfinity organizer for the Anker Powerbank PowerCore 20000. 15% infill 0,2mm
ithium batteries are dangerous and should be handled with caution. Please be aware of the risks of this project. I made this adapter for the M18 battery as a portable, light and powerful source to power my Pinecil v2 soldering iron. The…
Use your Bosch 18V Power4All batter pack as USB power bank adapter for charging up to three devices on the go. IMPORTANT NODES: The 18V lipo battery packs are usually unprotected (with no charging or discharging circuit on board). Take…
This is a case for a cheap USB charger-board (link below) and two cells out of a dell laptop battery for a Latitude 7420 or similar. The cells should be around 4000 mAh new, and from the “dead” battery that I pulled them from, 3 of 4…
I've printed a dozen or so of @jed_183683's powerbanks because I have an endless supply of salvaged 18650s. He already has a 3-cell model, but I needed a flat one for my application, so I just took his 1-cell powerbank and stretched it…
I made a Powerbank Mount for my Camera Tripod. I designed this for my Anker Power core 20100 Powerbank. Now i can easily charge my Sony Alpha 7 III, while it takes photos or Timelapse etc. The diameter of my tripod (ESDDI) is 2,4 cm.…
Cable clip for 22.5w 20000mAh baseus powerbank
CZ Ahoj! Dlouho jsem přemýšlel čím napájet notebook, páječku, telefon a další zařízení, až jsem objevil modul 100W PD USB C na Aliexpressu a věděl jsem že je to přesně to co hledám. INFO Baterie je v zapojení 3P4S - 15000mAh 16.8V Modul…
Just a box for 12.6V 3s3p 21700 packet used for powering a ham radio
This is a mini Powerbank for single use vape batteries. Ive used these charging thingis: https://www.amazon.de/dp/B08218L3WS?psc=1&ref=ppx_yo2ov_dt_b_product_details Its a tight fit. Nothing rattles everything is very compakt.
A case for a power bank control board that fits 25x 18650 or x 26650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast…
This is a custom-designed 3D-printable case for a 100W DIY powerbank project. It is compatible with a 5S2P lithium-ion battery configuration and includes space for a USB-C PD board. Youtube Video:…
To extend playtime a belt clip for a powerbank was needed for my new Oculus Quest :-) Powerbank is from Anker Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: 0.15 Infill: 18% Filament:…
he creado una bateria portatil, pero que le pueden cambiar rapidamente las baterias. se necesita un modulo de carga:…
goTorch is a powerful and compact flashlight that uses 18650 batteries. It can be recharged via USB-C and can also fast charge your phone. Super useful for camping! Also the cube form factor makes it easy to design different accessories…
I made this nice looking case for 30 000 mAh Aukey powerbank. It should also fit another powerbanks, but you'll need to customize it . I included Fusion 360 .f3d file for customizations. Print settings: It is important to print it on the…
This is a design of a handle for REVOPOINT POP & POP 2 3D scanner. In this case the scanner will be used with a mobile phone and a standard flat powerbank converting the scanner in an autonomous set to scan more comfortably. Ergonomic…
The XS10000 can keep the PICO4 charged without stressing the battery and has a switch to stop the charging, i tried different power banks but this one seem to allow 4 hours of play. My suggestion is to activate it when the internal…
This case fits HRD-B3X module with 4000 mAh battery. The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for…
case for whatever batteries you can find and stuff in it, i used ones from dead elfbars has internal size of 90 / 21.5 / 63 mm you definitely want to print the lid on a side, so the clipses are along the layers and wont break off one…
Say hello to ChargeBuddy V3 —your portable power pal that’s as efficient as it is stylish. ⚡🔋 Powered by a 22.5W quick charge module and two Samsung INR18650-35E batteries , this compact DIY creation packs a punch, delivering fast and…
Printing and assembly are super-easy You will need 5x M3x10 hex bolts; 5x M3 brass heat inserts; 2x 18650 Lithium-Ion batteries. BATTERIES MUST BE SIMILAR (e.g. single brand, same capacity, same voltage, same current, same discharge…
This remix builds on JankieL's adapter to create a compact 90W 3-port USB powerback from a DeWalt battery. All the wires are kept internal. I've included JankieL's top part in the list of files, along with the modified bottom part and the…
This is a design of a handle for REVOPOINT POP & POP 2 3D scanner. The handle has space for a mobile phone and the original powerbank included in the Premium Kit. This handle converts the scanner in an autonomous set to scan more…
Powerbank with 1/2 21700 cells and SW6106 board. You'll need: 21700 cell (2x for 2P model) capable of at least 4A charging and discharging (pretty much any, but 5Ah are preferred of course). 18650 should also work, though does not make…
Baseus power bank bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/7fbQGof 20000mAh 65W or another powerbank with max. size of 65 x 27 mm Happy printing!
Custom Powerbank made out of old laptop batteries. I have a lot of 18650 batteries lying around and finally, I also found a USB-C compatible power bank PCB from a drained-out bank so I made this one. Xiaomi's 20000mah power bank inspires…
My family constantly needs to charge their devices on the go. My 7-port USB charger gets a daily workout charging all of them! Before this, I just kind of stacked them in a pile next to the charging station. I thought that was unsightly,…
Моделі корпусу фірмового павербанку нашого клубу робототехніки CyberConstructingClub. У основі лежить модуль павербанку 65/100W на мікросхемі IP5389 з двома type-c портами. У конкретній збірці використовується з'єднання 3s2p що дає…
Heavily inspired by Patrovite, I made this cable holder to fit my power bank. And because I have a weird thing for hanging all my stuff on the wall I added a wall mount to it as well. As you can see in the pictures, the cable holder has a…
Longer (+3mm from the original) version for additional spring contact plates. Improved battery mount contacts: example or ozon ip5306: aliexpress or ozon battery: ozon
3d Version of my Powerbank there this one is the final version wich includes a actual working power button, measured cutouts for the ports and enough space for wiring for the cells and Board You'll have to connect the 6 batteries in…
A 50Wh Powerbank (4 cells parallel) case with LED Light, 2 USB-A Connections (out 1A & 2,1A) and 1 Micro-USB-B (in 1A). My measurements for the INR 18650-35E Cells from Samsung in this setup: Load: 11570 mAh (~5V) 11535 mAh (~5V) 11404…
Modular 21700 Powerbank. The cheapest branded (samsung etc.) 21700 batteries can be found on nkon.nl (I am not affiliated with them). I am using a cheap ip2368 board from aliexpress for 100w quick charging.
Batterypack holder for the steamdeck. Supports all kinds of powerbanks. I've printed it in ABS, but PLA or PETG would do just as fine. Printed on Bambu P1S with regular settings. Print with supports.
To make this powerbank I used 4 recycled Elf Bar batteries and a powerbank module T6845-C (not the best module but it works) Extra materials: 8x Hex Screw M3X8 Dimension: 5.7x5.7xh4.2cm
I wasn't completely happy with my 3 powerbank stand, so I remixed it. It's taller and longer for powerbanks with a higher center of gravity. There's a crossmember in the middle of the model now so the banks can't fall out of the bottom if…
Enclosure for V1284 22.5W PD QC AliExpress Powerbank Controller and 126011 battery bank. Requires superglue for assembly. Light guide should be printed with translucent filament.
