1 / 7
Sci-Fi 18650 PowerBank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sci-fi powerbank. uses two 18650 Li-Ion batteries, and a 5V 2A IP5306 module,
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 79
- Makes
- 0
- Views
- 633
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printing and assembly are super-easy
You will need
- 5x M3x10 hex bolts;
- 5x M3 brass heat inserts;
- 2x 18650 Lithium-Ion batteries.
BATTERIES MUST BE SIMILAR
(e.g. single brand, same capacity, same voltage, same current, same discharge rate).
CHOOSING DIFFERENT BATTERIES MAY AND WILL CAUSE PROBLEMS IN USE
- 2x wires (black & red), 10 - 15 cm each;
- 1x IP5306 5V 2A powerbank module
- 1x Soldering iron 40 W or more
- Solder + Flux
- Hands, eyes, family support
Download a model, open it in a slicer and split to objects. Orient all parts flat faces down.
- For materials I suggest you use ABS or PETG
- Layer height - 0.2 mm
- Wall count - 2 or more
- Wall generator - Arachne
- Infill - 25% honeycomb