Counting matching models…
Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…
Simple cage for 21700 liions in 6s1p and 6s2p configuration. I designed a simple universal Version without "feet" and a Version with “feet” so the packs fit and rest secure on the topdeck of the Falcon 7 frame. Also there is a connector…
After 1 ½ years of posting my Motorized Filament Feeder, a new machine was posted in Printables. The “Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament” designed by @MrFlippant inspired me to do a Printables…
For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…
After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…
This charger can be used with TP4056
I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks. You also have a little space on the outside to mount a capacity/voltage indicator board (I used one from banggood for 2s) Today I got the cells and installed them.…
Parents around the world face similar issues, including the problem of tonnes of batteries ending up in the trash from electric toys. My daughters also often get toys powered by traditional disposable alkaline batteries. So I often…
I use this packs to power my goggles, because I don't like having loose cables hanging around to my battery in the pocket. The 2s5Ah battery lasts me one complete racing day and recharge takes around 3-5hrs, depending on your USB charger…
printed in TPU, i got good results with 15% infill, concentric infill pattern
This is a very basic cover or holder to keep a 18650 battery contact and an basic 3 digit voltage checker together. you need: 18650 battery contacts like this…
HDZero DFR 2S 4800Mah Liion Cover
A quick n dirty enclosure for one round 18650-cell and a charge-controller / step-up device The code is a real mess, but hey it works - feel free to optimize the code :-)
Use strong metallic Promovec Carrier nXL casing to build new 10S3P pack from 21700 cells. Either build 3 blocks of 3x3 cells plus 1 block 1x3 cells with same dimensions as original 18650 pack and keep innards (lock, bms, connector, light)…
For an upgrade to lithium battery, you need to swap the dc charge port to ac. This plate allows bolting a new 110v ac male port to the cart. just cutout the old charge port and bolt up a new one to this plate. looked around forever and…
Adapter to use Makita LXT 18V batteries in older Bosch 18V NiMh tools. Tested on Bosch 52318 jigsaw. Uses Bosch upper adapter and lock bars by PhNxx: https://www.thingiverse.com/thing:4725237 Requires: 8x M4x8 SHCS 8x M4 hex nuts Makita…
This a battery box used to replace the old battery that contained Ni-Mh batteries with new LiIon batteries. You can follow the link to see the results: https://www.youtube.com/shorts/p5KDYzAk8KI?si=tkCB9g9bsyi69 You will need a BMS 4S 40A…
print 2 of these in tpu and build your pack in this shape, it fits in the NG really well.
This is my remix of curly_cz's great Taranis Q X7 LiIon 18650 battery holder . I removed all horizontal fillets as my printer frequently makes a mess of them when printing at low resolutions. I also removed the supports in the XT60 holder…
This is an adapter so one can use common 18650 LiIon cells instead of 26650 cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.34mm layer height and 0.4mm perimeter thickness. The cell…
This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…
Use strong metallic Promovec Carrier nXL casing to build new 10S3P pack from 21700 cells. Either build 3 blocks of 3x3 cells plus 1 block 1x3 cells with same dimensions as original 18650 pack and keep innards (lock, bms, connector, light)…
Three versions to use 18650 batteries in 26650 flashlights. Print instructions Print with vase mode and a 0.4mm nozzle to get the right dimensions.
This is a simple case for the Adafruit Micro Lipo USB charger. It snap fits together (or you can super glue it). It will hold the included power cable inside the case. The two holes on the front allow for the LED light to pass through if…
This is an adapter so one can use common 18650 LiIon cells instead of 3xAA cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.3mm layer height and 0.4mm perimeter thickness. Dimensions…
For an upgrade to lithium battery, you need to swap the dc charge port to ac. This plate allows bolting a new 110v ac male port to the cart. just cutout the old charge port and bolt up a new one to this plate. looked around forever and…
For attaching soldered or spot welded strips / cables it helps a lot, when you have a reasonable holder by hand. Therefore I designed two possible holders. Each one can be used for 1s, 2s or 3s LiIon batteries. Fits LiIon, LiFe cells of…
A quick n dirty enclosure for one round 18650-cell and a charge-controller / step-up device The code is a real mess, but hey it works - feel free to optimize the code :-)
3D Printable case for Adafruit Lipo Charger https://www.adafruit.com/product/259 Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: Yes Resolution: 0.2 Infill: 30% Filament:…
Zapraszam do filmu z budowy akumulatora Li-ion z ogniw 18650 do autka kolegi :), wykorzystane ogniwa 18650 oraz BMS 3s 60A… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…
Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…
Just another box for LiIon batteries, type 18650. The specialty here is the built in Voiltmeter and the On-Off-Switch. Feel free to make your 3.6 Volt or 7.2Volt Accu. Go in Parallel (3.6VDC) or Serial (7.2VDC). Get rid of sorrows to…
i find strapping 4s lion on belt is better than dangling in your fpv goggles
I created a Powerbank for 18650 Liion. Most parts are recycled parts: 3x 18650 Liion (in my case 2400mAh) 1x step up module 5V 1x connector cable (in my case a micro usb) 3x M3x20 screws The cell package is spot welded. See my Spotwelder…
I have found several models for LiION battery. But no of them has proper size for Sony's NP-BX1. I has been used male BEC cable e.g. this one . Please use at least ABS. Other materials has low melting point and you can demage charger…
I wanted to create a functional design charger. What you need: 2xTP4056 LiIon charger modules 2+2 contact plates plus / minus 2+2 green and red LEDs 2 voltmeters Micro USB-breakout board USB-C breakout board Some cable and shrink tube,…
Do pobrania mój projekt przeróbki baterii Pegasus Ebike - Przeróbka z Ni-Cd na Liion 18650. Film z budowy: Pliki CAD w formacie STP:…
A nice looking Holder for 18650 akkus. Its designed for storage, fast insert and removal. Not designed for akku welding. Print with 2 wall lines and 5-10% infill works for me. Or take 4 wall lines with 0 infill. There 2 stl files: drill…
I used TPU to print that case. My goal was to store 4 batteries in the smallest possible way. Print Settings (depending on your chosen material and printer capabilities) no support needed 0.2-0.4mm layer hight 3-4 perimeters 3-5 top…
Back Housing for "LiIon 18650 Battery Manager"
Holder for JETI Power Ion 2600A 2S1P receiver battery pack or similar 2S1P Li-Ion battery packs suitable for fixing into a model using four servo screws. The model is supposed to be printed from PETG to withstand elevated temperatures…
Just a few and simple (but useful) battery holders. Most other holders didn't fit my needs so I designed my own. They're a bit oversized for printers with poorer print quality. (d=19mm) Print settings Material: PLA Infill: 10% (but ig…
