2s 5000mah LiIon Battery Pack with USB-C, capacity checker and integraded balancer for goggles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The pack features a protection board, a capacity indicator, barrel jack power output and a usb-c balanced charging board
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this packs to power my goggles, because I don't like having loose cables hanging around to my battery in the pocket.
The 2s5Ah battery lasts me one complete racing day and recharge takes around 3-5hrs, depending on your USB charger capabilities.
I build it with the following items:
- BAK N21700CG-50 5000mAh
- DC barel plug 5,5X2,1mm
- https://de.aliexpress.com/item/32856841296.html?spm=a2g0o.order_list.order_list_main.11.1fa15c5fFvBfeh&gatewayAdapt=glo2deu
- You only need one cable for two packs, because it is cut in half.
- USB-C 2s LiIon charging board with integrated balancer
- Capacity indicator
- https://de.aliexpress.com/item/1005004976288058.html?spm=a2g0o.order_list.order_list_main.37.1fa15c5fFvBfeh&gatewayAdapt=glo2deu
- You need to order the 2s version
- (optional) Battery Protection board
- The board should be a long, but small one, so that it fits “in the groove” between the two cells
- BMS 2S 5A Li-Ion LiPo Battery 18650 Charger Protection Board 7.4V 8.4V Platine
- https://www.ebay.de/itm/173812220473
I printed the two battery holding parts in ASA. Theoretically any material like ASA, ABS or PETG should work.
The tolerances on the main body are very tight. So you need to have a very good tuned printer or you need to scale it a little bit in your slicer.
The small LED part is printed in clear TPU and needs to be super glued to the LED hole from the inside of the battery case prior to inserting the electronics.