1 / 5
IP5328P Powerbank Case with Loop for 60x105 battery
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modeled and printed this back in the summer of 2022 to salvage an old 10,000 mAh battery from an old power-bank.
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 157
- Makes
- 0
- Views
- 1,567
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made.
Remix it on Onshape:
Materials:
- x1 60mmx105mm Li-Po or “Pouch” Battery
- x1 IP5328P Battery Charger Circuit Board (https://www.aliexpress.us/item/2255800029749260.html)
- x2 M2x8mm Countersink Screws (To close the case)
- x4 M2.5x4mm Countersink Screws (To secure the PCB)
- x4 Wires (I used 22AWG/Gauge)
- A matching pair of JST-XH Connectors
Behind the scenes stuff:
I had planned to place the PCB above the battery increasing the thickness while cutting down on the length and integrate a place for an wireless charger but that's too much ask for my current CAD skill.