1 / 7
Powerbank Case for IP5306 USB-C Module for 1S 18650 lithium battery — image 1
1 / 7

Powerbank Case for IP5306 USB-C Module for 1S 18650 lithium battery

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Powerbank case for the IP5306 USB-C Module that I used with my salvaged 18650 batteries.

Rating
0 / 5
Likes
29
Downloads
159
Makes
3
Views
694
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a power bank case for my salvaged 18650 batteries. 

 

The module I used is in the link below. 

5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,

 https://www.aliexpress.com/item/1005006982908321.html 

Choose the "welding" version for the USB A connector-soldered module.

 

  • Since I used salvaged 18650 batteries with spot-welded headers, I could solder the cables directly to the headers. 

  • The module works best with a battery capacity of around 2000mAh.

  • Probably needs a how-to tutorial, but since I am lazy, I just added a simple guide and called it a day. 

  • Model tolerances are pretty tight, and the model requires a perfect first-layer print. 

  • Choose the seam position with the “back” setting. 

  • You can try the hide seams or scarf joint seam settings, but these settings alter the surface quality, in my opinion.

  • No need for supports or brims.

 

The model perfectly works for me; I am just sharing for feedback.

Tags