1 / 5
Powerbank HRD-B3X Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for powerbank HRD-B3X module.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 88
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This case fits HRD-B3X module with 4000 mAh battery.
The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for charging cable and microUSB port.
Recommended print settings
- layer height: 0.2 mm
- perimeters: 2
- solid layers: 5
- infill: 20% grid
- supports: no
Assembly instructions
- Insert battery.
- Insert HRD-B3X board. Place microUSB input into rectangular hole.
- Pass the charging cable through the round hole. Connect it to the board.
- Put the lid on. The lid should be glued to the case.
I additionally used hot glue inside to keep everything together.
Prepared files
Project and print files were prepared according to the recommended settings for Prusa MINI.