1 / 5
Powerbank HRD-B3X Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for powerbank HRD-B3X module.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This case fits HRD-B3X module with 4000 mAh battery.
The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for charging cable and microUSB port.
Recommended print settings
- layer height: 0.2 mm
- perimeters: 2
- solid layers: 5
- infill: 20% grid
- supports: no
Assembly instructions
- Insert battery.
- Insert HRD-B3X board. Place microUSB input into rectangular hole.
- Pass the charging cable through the round hole. Connect it to the board.
- Put the lid on. The lid should be glued to the case.
I additionally used hot glue inside to keep everything together.
Prepared files
Project and print files were prepared according to the recommended settings for Prusa MINI.