3D Druck Abteilung Schild (also in English)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3dimensional warning sign for the 3D printing department private or in the company. also printable with Single Extruder.
- Ocena
- 4,545 / 5
- Polubienia
- 110
- Pobrania
- 479
- Wydruki
- 13
- Wyświetlenia
- 2866
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
+++ENGLISH BELOW+++
3dimensionales Warnschild für die 3D Druck-Abteilung privat oder in der Firma.
auch mit Single Extruder Druckbar.
Für den Druck beachten:
Alle Teile einzeln slicen aber in der richtigen Höhenpostion.
Bei dem Düsen Modell sollten mindestens für die ersten mm im Druck ein Z Hop von ca. 10mm eingestellt werden, damit der Drucker nicht gegen den Schwarzen Rahmen des Schildes fährt.
Die Dateien sind durchnummeriert und müssen in dieser Reihenfolge gedruckt werden!
ACHTUNG: Der Startpunkt von dem Düsen Modell liegt niedriger als die höchste Kante des Schwarzen Rahmens! KOLLISIONSGEFAHR!
+++++++++++++++++++++++++++++++++++++++++++++++
3dimensional warning sign for the 3D printing department private or in the company.
also printable with Single Extruder.
For printing note:
Slice all parts individually but in the correct height position.
For the nozzle model should be set at least for the first mm in the print a Z Hop of about 10mm, so that the printer does not drive against the black frame of the sign.
The files are numbered and must be printed in this order!
ATTENTION: The starting point of the nozzle model is lower than the highest edge of the black frame! DANGER OF COLLISION!