Box for Socket Wrench Set 52pcs 1/4" plus some place for accesories

I did not use CAD for this model. I used the absolutly “customizable rugged box” and the Prusa Slicer, to to cut the “wiessmann” bit holder in pieces, placing it in the box and merge it to a new model. Great tools if you know hot to use them. The spacers in the lid are also made with the Prusa Slicer.
It is a relatively simple model designed to fit ¼-inch socket wrenches in general, not made for a specific brand or set. Also not made for turning upside down, some of the shorter bits get mixed up.

The bottom part is only 2 cm shallow so that the bits are easy to see and handle. The lid is also 2 cm, providing a total internal height of 4 cm.

For the hinge I used 2 M3x40
For the latch I used 2 M3x55

I know, 55 is a stupid size, but I bought some for this kind of boxes. This size is needed for bigger boxes.
Like this one I made

My Print Settings:
The latch I printed with PETG
The body I printed with old PLA leftovers, which I had to use up
0,2mm Speed Setting
Infill 15% Gyroid
Seal: Top and bottom 2 perimeter, walls 1 perimeter, 0% infill, TPU 94A

The Text I did in prusa slicer, If you like the square arrount the text, just choose “split into parts” and give the square a color, then write text on the sqare in the color of the boby.

To assemble the box, please refer to the URL of the remix of “customizable rugged box”.