Nanoleaf Light Panels case front
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a new case for my Nanoleaf Light Panels, since the old one changed from white to something else.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 84
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a new case for my Nanoleaf Light Panels, since the old one changed from white to something else. As you can see on one of the pictures, the case changed from white to yellow where the electronics are located. With this you can change it to another color, or maybe just use white again, like me. I've used PETG for the case (it gets a bit warm) and PLA for the buttons. The buttons don't need any further work, just drop them in the case and assemble it.
This will only replace the front, you can keep the back with the sticker, and you can reuse the screws.