IKEA bed pin for BRIMNES and HEMNES bed (part no.: 110525)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple bed pin with a little twist: it can be printed on the side to get the maximum strength. No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Bought a used BRIMNES IKEA bed for my son, upon putting it together realized, that a few of the pins holding the bed slats were missing. While IKEA would send these small parts for free, it would have taken two weeks to arrive from Germany.
So quickly measured the one I had in hand and designed in Autodesk Fusion with a little twist: it can be printed on the side to get the maximum strength. No supports needed.
Printed of Prusament PETG.
Attached the Fusion and STEP files as well.