Ender 3 Case for BTT SKR boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an electronics case for fitting a BigTreeTech SKR board (tested with SKR 1.4 Turbo and SKR 2) to an Ender 3.…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 1889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an electronics case for fitting a BigTreeTech SKR board (tested with SKR 1.4 Turbo and SKR 2) to an Ender 3. All SD and USB-ports on the SKR board stay accessible with this case design.
.
.
All mechanical connections are to be made using M3 and M4 hardware.
.
.
The Case consists of 5 individual parts:
-Main Case (takes the mainboard and the cooling fan)
-Cable Guide (guides all the cables through the same cutout where they originally went)
-4020 Cutout (covers the 4020 aluminum profile from the internals of the case)
-Left Lid (includes a cutout for the cooling fan wires)
-Right Lid (acts as an exhaust for the warm air in the case)
.
.
I attached some Screenshots for printing guidance and support usage, as most of the case can be printed without supports, therefor I used Cura's support blocker plugin to reduce the amount of support printed and to keep it only in areas where it is really needed.
.
.
Disclaimer: Fitment still needs to be confirmed outside of the CAD model.
Category: 3D Printer Accessories