Ender 3 Case for BTT SKR boards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an electronics case for fitting a BigTreeTech SKR board (tested with SKR 1.4 Turbo and SKR 2) to an Ender 3.…
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 110
- Makes
- 0
- Views
- 1,889
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an electronics case for fitting a BigTreeTech SKR board (tested with SKR 1.4 Turbo and SKR 2) to an Ender 3. All SD and USB-ports on the SKR board stay accessible with this case design.
.
.
All mechanical connections are to be made using M3 and M4 hardware.
.
.
The Case consists of 5 individual parts:
-Main Case (takes the mainboard and the cooling fan)
-Cable Guide (guides all the cables through the same cutout where they originally went)
-4020 Cutout (covers the 4020 aluminum profile from the internals of the case)
-Left Lid (includes a cutout for the cooling fan wires)
-Right Lid (acts as an exhaust for the warm air in the case)
.
.
I attached some Screenshots for printing guidance and support usage, as most of the case can be printed without supports, therefor I used Cura's support blocker plugin to reduce the amount of support printed and to keep it only in areas where it is really needed.
.
.
Disclaimer: Fitment still needs to be confirmed outside of the CAD model.
Category: 3D Printer Accessories