1 / 5
MMU3 UltiMulti Selector Remix: Front Plate for PC4-M5 Coupler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the front plate and the selector. You can attach PC4-M5 coupling without M5 threaded insert.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 494
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (26)Powiązane
I remixed two parts of the selector for MMU3 UltiMulti by David (@David_84304).
- SELECTOR_FRONT_PLATE_B5_PC4M5.stl
The original design required a heat insert, which had to be purchased separately. To eliminate this requirement, I modified the part by adding modeled threads to the hole, allowing the PC4-M5 coupling to be installed without an M5 threaded insert.
- selector_b19_experimental_CUT.stl
While printing this file, the clamp for the SuperFINDA sensor frequently detached from the build plate, causing print failures. To improve bed adhesion, I added four mini brims to the initial layer.