1 / 5
MMU3 UltiMulti Selector Remix: Front Plate for PC4-M5 Coupler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the front plate and the selector. You can attach PC4-M5 coupling without M5 threaded insert.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 77
- Makes
- 1
- Views
- 495
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I remixed two parts of the selector for MMU3 UltiMulti by David (@David_84304).
- SELECTOR_FRONT_PLATE_B5_PC4M5.stl
The original design required a heat insert, which had to be purchased separately. To eliminate this requirement, I modified the part by adding modeled threads to the hole, allowing the PC4-M5 coupling to be installed without an M5 threaded insert.
- selector_b19_experimental_CUT.stl
While printing this file, the clamp for the SuperFINDA sensor frequently detached from the build plate, causing print failures. To improve bed adhesion, I added four mini brims to the initial layer.