Counting matching models…
I have designed decoupling feets for the orignal feets of the Prusa Box. Just stick a few pads underneath and everything is a little quieter and produces less vibrations.
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Spřáhlo pro modelovou železnici LIMA 0: Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 30% Filament: Prusa, DevilDesign... PETG black Category: Toys & Games
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions: Material: PLA Layer: 0,10 Perimeters: 2 Infill: 15 % Supports: No For better adhesion to the hotbed, I recommend using a brim. Also consider using a slower print speed, more details in the attached 3MF file. Part list:…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a fence post coupling i created to attach an electrical box and a security camera. Print instructions I added the fusion file so you can change the width if you are using the design for a fencepost with a different thickness.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Modeltrain_HO_1-87_LIMA_coupling. Need a 0,25mm nozzle for printing 0,05 mm layer.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This replaces the tube coupling on the back of the K2 Plus to allow connection of the side spool holder and the CFS at the same time. Can also be used with a drybox. Can be used with CFS buffer mounted on the printer or on the CFS.…
Please reuse the rubber and nut already attached to the SH02 when installing the replacement .
My Vcore 3.1 XY Motor Stepper Mount Mod This mod offers several advantages: Belts are now visible so you can check if they are running properly on the idlers Shoulderbolts for perfect concentricity The pulley runs on a 5mm shaft with ball…
These are my most recent design of Nem Hook and loop couplings. like the other couplers, I've uploaded, you mainly just need a paper clip to act as a pivot for the hook. you should be able to use these couplers with already existing…
A GoPro Attachment for Bike with Quick change for adjustable tripod. Use a Spring if you like (as shown in picture) to fast adjustment to ground. Tighten the screw with spring before placing the tripod with GoPro on the ground. The spring…
Adjustable coupling bar to connect the servo saver of an OpenRC F1 car to the servo motor. Tighten the nut near the head of the M3x30 bolt to secure the servo saver side the bring another nut down near the first. These don't need to be…
This is a coupling/adapter to connect Makita hose adapters (OD=37.5mm) to Einhell vacuum (OD=35mm).
fischertechnik Gear Z20 and Z60 for metal flange coupling. Depending on the inner diameter of the flange coupling, these can be used on 4mm axis DC motors (e.g. ZGB25RP and JGA25-370) or 5mm axis DC motors (e.g. Nema stepper motors)…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - it comes with a aditional/optional seal for ataching to rough surfaces…
This is an wallmount for a CEE 32A coupling. Preferrable printed in PET-G You need following parts: 4x threaded inserts (like the inserts sold by Cnc Kitchen) 4x M3x16 counter sunk screw 2x ø6 Wall mounting screws optional: 2x matching…
Check the file here: https://a360.co/4fuqKD3
this is an experimental coupling for nem-fitted railway models. the idea was inspired by the sprat and winkle system. using small weights to hold a hook up and pulled down with magnets under the track. this is meant to be hands-free. it…
when it comes to adjusting couplings' height you mainly see these sold or made for Kadee couplers, and for a good reason. This style of coupling is very common on most American Ho scale models and has a special NEM coupling made for…
Draft for a bungee-sprung coupling that will self-reset into place after being bumped (or at least will be easy to reset) Background: Problem to be solved: Some (protuding) parts of assemblies might get subjected to external forces so…
Koppelclip / Verriegelungsclip für Fliegengitter- und Verdunkelungsrollo im Wohnwagen Ersatzteil für Kombirollos bestehend aus Fliegengitter und Verdunkelungsrollo. Der Koppelclip verbindet beide Rollos miteinander und ermöglicht…
2 inch Sewer Cap / coupling to seal around 1 inch ice maker drain line. Cap top has vent openings. This is for an outside drain used to empty ice maker water. Printed in TPU. Like the Freebie? Be sure to Rate and share your Make. 😎
Maniglia per lo smontaggio dei perni di accoppiamento per estrusori Prusa XL PETG
I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…
This part replaces the original one. Two parts click into each others. Fell free to improve my design. Printer: Bambu Lab A1 Infill: 15% Filament: Aurapol PLA White
Gland coupling with double orings. 100%waterproof. The model is parameteric in fusion so you can use whatever oring you have. Designed with the help of Parker O-ring handbook. To assure waterproofness you need tho file/sand down the seam…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - v1.0 is used for coupling 100/125/150mm - v1.3 is used for coupling…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - it comes with a aditional/optional seal for ataching to rough surfaces…
MECHA SERIES This models is a part of my MECHA series of main SV06+ Components. Z-Axis Blocks Custom Z-axis blocks, supports oldham couplings on the bottom or stock configuration on the top. Uses M3 heat-set inserts (henceforth referred…
Last year, I bought some Tado radiator thermostats to give me better control over my heating in winter. The problem was that when I first installed the M28x1.5 radiator valve coupling, I tightened the screws too much. After about a week,…
A modified model for a 2kg spool that doesn't hold together. And there are problems with it. There are two lengths. 110mm and 115mm. Usually 115mm fits, but sometimes it is necessary to use the shorter length 110mm. 2 pieces of sticks are…
this is the nut for an upper spray arm in a Kelvinator dishwasher. It will also, more than likely, fit AEG or Electrolux models. I designed it because I could only find models that had 4 notches instead of the 3 that I need.
Spojka a zátky pro hadici vzduchotechniky 75mm
I used "Concertomeister Baso" ( https://www.amazon.de/dp/B01MXW4BGR ) however other products should work as well. Edit the CAD model for different type. (btw, if you wondered: They have brown stains because of an espresso accident ;))…
This model is based on the geometry of the McMaster‑Carr 2464K14 clamping precision flexible shaft coupling. It connects a 5 mm stepper motor shaft to an 8 mm leadscrew , using a helical flex pattern to compensate for minor misalignment…
Description Enhance your NEMA 17 stepper motor with this new, more compact version of the 1:4 planetary gearbox. Designed for high torque output, precise control, and a reduced footprint, this gearbox is perfect for robotics, CNC systems,…
Blender Dişli Kavrama Parçası. - Blender Gear Coupling Part. Denenmedi. - Not tested.
an 10" RJ45 coupling rack for adding couplers to your server, original model: https://www.printables.com/model/244377-r
Coupling and mating part for the Scarlett SL 1543 Blender
You need 1x TT motor and 2x AA 2x battery and some battery tabs. Print 0.2 mm layer no supports PLA. Use 2x M3 nuts AMD bolts to attach motor frame to TT motor. Don't forget to place front axle into the motor frame before screwing the…
A trailer coupling for the Mogster based on the Original U406 Rockinger 227G coupling. As it would be to complex and fragile to FDM print, this coupling is not automatic and uses a small D10x2mm magnet to hold an M2x20mm screw embedded in…
This part replaces the original one v1 version. Two parts click into each others. This version should improve stiffness. Fell free to improve my design. Printer: Bambu Lab A1 Infill: 15% Filament: Aurapol PLA Green
The plastic spring used nowadays by LGB to push up the coupling hook deteriorates over time. These sagging hooks result in spontaniously unhooking of wagons in your trains. This is my attempt to fix this by using a spring salvaged from a…
First upload, yay! Simple one-piece replacement coupling for a ball chain used in roller blinds (for example older Jysk blinds). Designed for ball diameter of ~4.5mm. The original part had a living hinge which gave up and the part split…
This adapter has been specially designed to convert the unique spline inner profiles of brass couplings to a standard hex profile, allowing the use of conventional tools without the need for a specialized key. The adapter easily inserts…
Purchased Makita XSL06 saw used and it did not come with a dust bag. So purchased the dust bag, but required a coupler to attach the bag to the saw, which was discontinued. So made this. The long side is tapered slightly and fits into the…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
For my LGB model railway I had to make some rack railway sections, but the original coupling hooks will detach, because the toothed racks will lift the downward part of the hook, so the carriages likely will detach, just very similar to…
Just a simple tool that makes inserting a new O-Ring into an inflator quick coupling much easier. The needed O-Ring size is BS610 (6,75x1,78mm). Pull the coupling ring back as if you would when connecting a BCD and insert the pin with…
Print in Petg or ABS. The black rubber O-ring is stock
If your clutch has become unusable, print this one. The old clutch is simply tightened with pliers, the new one is pressed with blows of a rubber hammer. Printed from PLA in layers of 0.16. Infill 100%.
Female and male couplings of the remixed hydroponics tower. Handy to create custom components.
Parametric coupling (fusion). Prints without supports. You can set diameters, number of teeth, locking power etc. Tried in PETG and PLA. Shown here in a make with some handles to make it easier to twist & lock Edit 2024-10-13: Fixed some…
A tool that helps to release the engine clutch from the gear. / Ein Werkzeug welches beim lösen der Motor Kupplung vom Zahnrad hilft.
Search Part No. at JLCMC : CXKK Inner diameter:5-20mm Outer diameter:26-36mm jlcmc.com is an automation mechanical platform. We specialize in mechanical parts and industrial automation, with over 600,000 products and a 100,000 m²…
This is a fidget toy that may be used with a keyring. It is a model of a Shibata style train coupling used for example on the Shinkansen: https://en.wikipedia.org/wiki/Railway_coupling#Shibata_coupler No supports are needed for printing…
Replacement part for the "Messeraufnahme" / motor to knife coupling for Monsieur Cuisine Plus / Silvercrest SKMK 1200 A1 This model fits very snug and should hold without the snap ring. The snugness should make it last a little longer…
Coupling for garden hoses coupling diameters 10mm, 12mm, 14mm, 16mm, 19mm, 20mm, 25mm. Spojka pro zahradní hadice průměry 10mm, 12mm, 14mm, 16mm, 19mm, 20mm, 25mm.
coupling conecction 8cm-5cm 75-54mm I used this for air duction of laser gases to adapt some coneections and designs
This is a coupling for a 2" Hose. Printed from PLA and stood up fine to the chemicals in the pool. Hose Clamps required.
A cover to protect a connection between a starlink gen 3 cable and a slim line ethernet cable. The slim ethernet cable allows you to pass the cable through a european style window, without having to drill holes into the outside walls of…
Customized version of http://www.thingiverse.com/thing:44078 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44078 Instructions Using the following options: H3 = 4 H2 = 7 H1 = 30 Dnut = 4 Hnut = 2.5 SLICES…
Plug for standard 4mm PTFE tube coupling. The plug holds a few centimeters of filament inside so you can pull it out with the plug without opening the drying box. The plug is tapered inside so it can grip standard 1,75mm filament and…
This holder is designed to securely fit the hose extension for the Miele HX1 vacuum cleaner. It functions as an insert that can be integrated into existing wall mounts and is easily installed using two M3 screws. The design is…
Coil Spring Type Coupling at JLCMC Search Part No. at JLCMC : CXKL-D16-d5-e6.35 Inner diameter:5-14mm Outer diameter:16-26mm Google search JLCMC or click below for more detail. You can download our free 3D CAD file or go purchase it at…
Diaphragm Couplings at JLCMC Search Part No. at JLCMC : CXGP-1-D32-d7-e8 Single/Double Diaphragm Inner diameter:6.35-25mm Outer diameter:32-63mm Google search JLCMC or click below for more detail. You can download our free 3D CAD file or…
Flexible Shaft Couplings at JLCMC Search Part No. at JLCMC : CXHQ-D40-L-d10-e12 Space ring color: Blue/Red Inner diameter:10-16mm Outer diameter:30/40mm Google search JLCMC or click for more detail. You can download our free 3D CAD file…
Parallel Line Coupling at JLCMC Search Part No. at JLCMC : CXJP-S3-D20-d5-e5 Main material: Aluminum alloy / SUS304 Inner diameter:6.35-18mm Outer diameter:12-40mm Google search JLCMC or click below for more detail. You can download our…
PEEK Parallel Line Coupling at JLCMC Search Part No. at JLCMC : CXJR-D25-d6-e6 Main material: PEEK Inner diameter:6-15mm Outer diameter:25-36mm Google search JLCMC or click below for more detail. You can download our free 3D CAD file or…
Rigid Coupling at JLCMC Search Part No. at JLCMC : CXJT-A-D16-d3-e6 Main material: Aluminum Alloy/ Stainless Steel Inner diameter:3-20mm Outer diameter:16-40mm Google search JLCMC or click for more detail. You can download our free 3D CAD…
A coupling for an old 1970's Kenwood Chefette A340 food mixer. The plastic of the original coupling for the blender attachment had deteriorated and was crumbling into bits. I found a similar coupling and remixed it to fit the A340. Edit:…
Adapter kitchen faucet to Gardena coupling I use it myself to attach a hose when cooling my beer brewing. Don't forget a rubber gasket between the adapter and the faucet.
Don't forget a rubber gasket between the adapter and the faucet.
This is a replacement coupling between the fan and the internal mechanism of a Venta airwasher / humidifier / luftwäscher. This mechanism turns the ‘wheels’ that evaporate the water. The type nr of the airwasher is LW44, but maybe it will…
The coupling of my black and decker mixer was broken so I printed another one.
A DN100 magnetic dust collection coupling for my planer. It consits of three parts. Part 3 has to be glued in part 1 to have a better alignment of the coupling. I used the following magnets:…
I made a model of a T-shaped pipe connector. 30mm main pipe. 19mm outlet. It prints without support. Hence the shape of the holes. If you need other sizes, please message me.
Maniglia per lo smontaggio dei perni di accoppiamento per estrusori Prusa XL PETG
CZ: Adaptér není vhodný pro použití ve vodovodním řádu, kde může být tlak až 6 bar, nicméně pro montáž za vodovodní baterii u sprchy, umyvadla či dřezu je možné ho použít (nízký tlak). Pro tisk doporučuji použít PETG (zdravotně nezávadný)…
I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…
I used this magnetic coupling on my old Prusa i3, and found it very convenient to use. You got 2 ways to use it once mounted on the orbiter: just as a plain funnel if your actual spool sits right above the extruder. If you got a second…
a replacement coupling for a Bosch continuous slicer (part number 00032884) 3d-printable version of the original part compatibility according to Bosch website: MUM4406 MUM4427, MUM4655 MUM4655EU MUM4656COE MUM4657 MUM4756EU MUM4855…
My crappy drill pump is supposed to fit standard garden hose thread (GHT), but every stock hose or coupling I've tried slips right off. Thanks to @Nat_ for uploading the F3D model since I was able to import a new thread form (M19 x 2.2 /…
Connects NEMA 23 stepper motors to M12 shafts: Enables efficient power transmission between the motor and the driven load. M3 screw assembly Compact and lightweight: Ideal for space-constrained applications. Easy to install: Simple and…
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
This aluminum flexible coupling is designed to connect and transmit torque between two shafts, particularly suitable.
This design offers a practical and efficient solution for coupling high-power LED light to optical fibers. The housing is a modular box that can hold up to six LEDs. Its top cover includes precise, narrow openings that allow plastic…
Let your child be creative with this coupling to construct a kind of trailer etc. to the Lego Duplo car.
Used to join two 5" spiral round ducts together. One end fits on the outside, the other fits on the inside to minimize duct catching on faces.
Beschreibung: Diese Fensterheberkopplung wurde speziell für den Smart Fortwo 450 (Baujahre 1998–2007) entwickelt. Sie dient als Ersatzteil oder Upgrade, um die Mechanik des elektrischen Fensterhebers wieder funktionsfähig zu machen. Das…
I modified a hose coupling that was slightly too large to fit the standard 2.25 inch shop vac hoses. I made both inner and outer hose couplings that go on the outside of standard 2 inch pvc pipe. Metric dimensions 58mm-60mm (inner-outer)…
Rail coupling for 45mm rail parts. Model kolejí ke stažení https://www.thingiverse.com/thing:810196 and another model is on Thingiverse server.
This part needs a strong material, I used PETG-CF but you might be successful with PETG only. You will need supports for the lower beams, and 4 perimeters or 100% infill.
Printed it with PETG for strength. The fit is rather snug, you may want to vary the scaling of one part a bit to loosen the connection a bit. I recommend printing it vertical due to the overhangs in horizontal position
I use a PTFE tube from the filament dryer to this connector and from the connector to the extruder. You can just clip this to the frame of the MK3S+ and then clip a connector such as the one in the picture to it. Prints well without…
