Sampler Hoop Coupling
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.59 – €0.72 net (excluding VAT)
For file: Sampler Hoop coupling - Screw [x1 ]V01_0.1mm_PLA_MK3S_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.65 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 57 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple hoop not only for filament samples.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Print instructions:
- Material: PLA
- Layer: 0,10
- Perimeters: 2
- Infill: 15 %
- Supports: No
For better adhesion to the hotbed, I recommend using a brim. Also consider using a slower print speed, more details in the attached 3MF file.
Part list:
- PVC coated wire [ø 2.2 mm]
- Press sleeve
Press sleeves
Assembly instructions:
The first end of the wire is firmly glued to the screw. I used epoxy glue.
I threaded the second end through the nut and put a small tube on the end of the wire and squeezed it with pliers. I made a tube from press sleeve.
Important, the wire must rotate in the nut!
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can customize the model by simply changing variables.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.