1 / 1
Scuba Inflator Coupling O-Ring Tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scuba Inflator Coupling O-Ring Tool
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 169
- Makes
- 0
- Views
- 614
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple tool that makes inserting a new O-Ring into an inflator quick coupling much easier. The needed O-Ring size is BS610 (6,75x1,78mm).
- Pull the coupling ring back as if you would when connecting a BCD and insert the pin with it's base first. The small hole in the bottom allows it to ignore the schrader valve pin. You can remove the schrader valve if you want to, but it's not needed.
- Lubricate the O-Ring and insert into the opening around the pin
- Use the Pusher to move it down the hole and to force it into it's groove
- remove both pusher and pin afterwards, done
Material and print settings don't really matter much for this one, PLA or PETG are both fine. I used 3 Walls and 10% gyroid infill.