1 / 5
IKEA Skadis holder for Peak Design Plate (T-Nut)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Peak Design plate to securely hang your camera on an IKEA Skadis wall
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 306
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
Utilizing the Skadis T-Nut system I designed a holder to fit the Peak Design camera plate.
Hardware required are a regular M2.5 or M2 nut and a corresponding socket head screw at least 16mm long.
Print with at least 10% infill and your standard perimeter settings, nothing fancy requiered.
I have provided presliced files for the MK4S, the holder alone and presliced including either an M2.5 or an M2 T-Nut.
Theres also a .STEP file to make remixing easier