Simple Headphone Hanger | Screw or Tape mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print headphone hanger. Allows mounting unter your Desk with 2 screws or double sided tape. Or both...
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy-to-print headphone hanger. Allows mounting under your desk with two screws, double-sided tape, or both if your audio gear is particularly heavy-duty.
My Sennheiser HD430 headband is 50mm wide. I increased the V2 width by 5mm and added a lip at the front. Net useable width without chamfers and fillets is 55mm.
Printing:
Laid on its side like in picture #3
I recommend 4 perimeters and as much infill as you like.
I recommend PETG but PLA should work too.
No supports needed. Use a brim if you like.
Mounting:
Use 2 small wood screws with countersunk heads.
Alternatively fix it under your desk with some strong double sided adhesive tape. I recommend the foamy stuff. I love using tesa® ULTRA STRONG tape.
Using:
Hang your headphones when not in use so they dont clutter your desk.