Simple Headphone Hanger | Screw or Tape mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print headphone hanger. Allows mounting unter your Desk with 2 screws or double sided tape. Or both...
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy-to-print headphone hanger. Allows mounting under your desk with two screws, double-sided tape, or both if your audio gear is particularly heavy-duty.
My Sennheiser HD430 headband is 50mm wide. I increased the V2 width by 5mm and added a lip at the front. Net useable width without chamfers and fillets is 55mm.
Printing:
Laid on its side like in picture #3
I recommend 4 perimeters and as much infill as you like.
I recommend PETG but PLA should work too.
No supports needed. Use a brim if you like.
Mounting:
Use 2 small wood screws with countersunk heads.
Alternatively fix it under your desk with some strong double sided adhesive tape. I recommend the foamy stuff. I love using tesa® ULTRA STRONG tape.
Using:
Hang your headphones when not in use so they dont clutter your desk.