Case for Air Quality Monitor using ESP32-C3-SuperMini + SGP41 + SHT-40 + ICP-10111 Sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Air Quality Monitor using ESP32-C3 Super Mini, custom PCB with SGP41, SHT-40 & ICP-10111 sensors & OLED screen
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Came across this post on reddit, where a user created a custom PCB with the following sensors :
- Sensirion AG SHT-40-AD1B Temperature and Humidity.
- Sensirion AG SGP41-D-R4 NOx and VOC.
- TDK ICP-10111 Barometric pressure and temperature.
Also uses:
- ESP32-C3-SuperMini
- 0.96" OLED display
The reddit user listed this board for purchase on ebay! This case is custom made for this tiny stack!
No screws .. just press fit. The OLED screen rests on 4 posts for the mount holes.
Do double check the dimensions of the OLED display. I had a few, and the screen sizes varied based on the manufacturing batch, even though they were purchased from the same aliexpress seller.
Full details/code here:
https://github.com/RonHeg/SGP41-VOC-Shield