iPhone 13/14/15 + Case - Vertical and Horizontal Orientation - Standby Mode Dock Alarm Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the iPhone 13 charging station. I shortened and modified the station to allow it to be used vertical.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet to prevent slipping, which I find especially useful in the vertical position.
The docking station is large enough to fit an iPhone 13 and 14 with a case (152x75mm). A MagSafe charger or similar models with a diameter of ⌀ 56mm must be glued in. I’m using the cheaper one from AliExpress, which works well without any issues
This 3D model is not for commercial use.
Print Settings:
- Top shell layers: 3
- Bottom shell layers: 2
- Infill density: 8%
- Infill pattern: Gyroid
- Infill/Wall overlap: 10%
- Support type: tree(auto)
Materials list:
Silicone feet - https://de.aliexpress.com/item/1005006127798045.html?spm=a2g0o.order_list.order_list_main.21.186d5c5f2TAUWA&gatewayAdapt=glo2deu