iPhone 13/14/15 + Case - Vertical and Horizontal Orientation - Standby Mode Dock Alarm Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the iPhone 13 charging station. I shortened and modified the station to allow it to be used vertical.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 95
- Makes
- 0
- Views
- 1,464
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet to prevent slipping, which I find especially useful in the vertical position.
The docking station is large enough to fit an iPhone 13 and 14 with a case (152x75mm). A MagSafe charger or similar models with a diameter of ⌀ 56mm must be glued in. I’m using the cheaper one from AliExpress, which works well without any issues
This 3D model is not for commercial use.
Print Settings:
- Top shell layers: 3
- Bottom shell layers: 2
- Infill density: 8%
- Infill pattern: Gyroid
- Infill/Wall overlap: 10%
- Support type: tree(auto)
Materials list:
Silicone feet - https://de.aliexpress.com/item/1005006127798045.html?spm=a2g0o.order_list.order_list_main.21.186d5c5f2TAUWA&gatewayAdapt=glo2deu