Counting matching models…
It holds your iphone 15 Pro (Adjustable for others too) in place via the magnetic charger. Due to the iphones function to display a clock-screen while charging, this stand also makes for a nice tableclock. The phone is released by simply…
It holds your iphone 15 Pro (Adjustable for others too) in place via the magnetic charger. Due to the iphones function to display a clock-screen while charging, this stand also makes for a nice tableclock. The phone is released by simply…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
For people who dont have the magsafe charger .. Standby Mode dock only for iphone 16 with case/cover wired. Short in length and Fast print (Around 2Hours) . Might work without supports. Inspired by the Scott Yu-Jan Dock Design. Added a…
Adaption des bekannten Scott’s iPhone Standby Mode Docks , angepasst für Google Pixel Geräte. Kompatibel mit: Pixel 9 Pro XL Pixel 10 Pro XL Funktionen: Verwendet das Anker Zolo Magnetische kabellose Ladepad (ca. 15 € bei Amazon )…
I wanted to use the new iOS StandBy clock mode, but the IKEA LIVBOJ charger is designed to lie flat. So I designed this simple vertical stand that holds the LIVBOJ securely in an upright position. The result: Your iPhone charges…
Standby charger for an iPhone 15. works with my new Pixel as well. Room for two notebooks at the back, and some storage for pens etc.
A quick release mount for the Votronic 12V Standby Charger ( https://www.12voltplanet.co.uk/votronic-12v-standby-charger-trickle-charger.html ) allowing for easier installation and maintenance. The charger is wired between leisure and…
I keep my Sennheiser Momentum 4 headphones hanging on the side of my desk, and I wanted to replicate the automatic standby behaviour of the official case that puts the headphones to sleep as soon as you store them using a magnet. To do…
remix of "iPhone Standby Mode Dock (designed with OVERWERK)" by Scott Yu-Jan for the iPhone 14 Pro Max.
Adapted using a super primitive method to fit my iPhone 14 Pro Max with no case. Use the 20 minute fit test to test your phones fit before commiting to the 6.5 hour print. Also includes the slot for the apple watch charger on top to…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
This case-friendly Standby Mode dock is designed for the iPhone 15 Pro Max model. It is based on Scott Yu-Jan's design , but this design does not support AirPods case charging capability. This design is slimmer and more minimal which…
Adjustment of the storage for the Apple Watch/AirPods charger. Úprava uložení nabíječky pro Apple Watch/AirPods
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
Remixed from Scott Yu-Jan's iPhone standby dock to make it compatible for the Google Pixel 7 with a case.
This is inspired by Scott Yu-Jan's model here (https://www.printables.com/model/992992-every-iphone-stl-adjustable-f3d-file-scottyu-jan-o) however I designed it entirely from scratch to fit my specific needs. I am tagging it original…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
Features Fits an iPhone 12 Mini with a Quad Lock case Clicker is thicker and protrudes from the base Base is smaller and straighter Allows use of silicone pads Differences compared to the original Adjusted dimensions to fit an iPhone 12…
Things changed: Increased depth of phone slot to make case flush with dock Chanced length and with of dock for 12 pro max with 2mm tolerance for case (dimensions in screenshot)
This is a modification of Scott Yu-Jan's iPhone Standby Dock, with the addition of another Apple Watch Puck, to fit 3 devices: iPhone (all non-max models) , Apple Watch, and Airpods, permitted they all use MagSafe. This is his…
REMIX: iPhone 15 with Case Version of the iPhone Standby Mode Dock by ScottYu-Jan & OVERWERK Measurements done for iPhone 15 with Case . (Buff Magsafe Air Hybrid Case to be exact) Print with: 0.25 layer 2 walls %8 Support Cubic 2 bottom /…
Modified the dock from Scott Yu-Jan to fit the Samsung S23 Ultra. It was designed with a cover and the charger size was modified to fit the Simple Mini 3 from Baseus. It also has the fusion 360 files in case you need to change something…
I wanted to finally use my Anker 313, so i modified the dock a bit. I still wanted to watch Videos, but in the original version the sound has been cut off, i added cutouts for the speaker and mic.
Wanted a solution for both phone and watch as I charge them both nightly prints without supports
I used an Ender-3 S1 to part this stand and that is what I based my tolerances off of. I did not use any supports for either component.
Experience the perfect companion for your iPhone with our versatile standby dock. Charge your device and use it as a clock, alarm clock and organiser at the same time. The dock is available for iPhone 14,15,16 models - simply connect your…
This is a remix of Scott Yu-Jan and OVERWERK https://makerworld.com/en/models/615378#profileId-538769 I shortened the back of the unit to save some filament costs. Removed the airpods charging slot as I dont have one (this also helped…
I really liked Scott Yu-Jan's iphone 15 standby mode dock, so I made it fit an iphone 12 with a thin hardshell case. I also modified the airpods charger slot to slot in from the other side, so that the rear of the case can be shorter than…
Important Notes: Measure your Magsafe charger and adjust the dimentions in Fusion accordingly. I used knock-off Magsafe chargers (do not recomend, they get really hot) and based dimentions around those. Phone dimentions are based off of…
Printing instructions: printed with PLA 15% infill support - see pictures 0.15 mm layer height
About: The model offers an ideal Smartphone stand for everyone looking for an minimalist, simple design for not only holding his phone, but also charging it. Assembly: Just print and put your IKEA Livboj Charging-pad in the slot. If the…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
- The perfect magsafe charging dock for your iPhone - simple design, two Parts, four options for angle and tilt. - Easy to print (no supports) and easy to assemble. Just click in your magsafe charging port. Print Settings · model in…
Inspired by Braun's BC07 alarm clock, this mount lets your iPhone function as an elegant desk clock using standby mode. The MagSafe charger sits in the front panel for secure attachment, with a thoughtfully designed cable channel for…
I designed a 3D-printed MagSafe dock tailored for my iPhone 13 Mini. It holds the phone securely while charging and features a storage compartment in the back, perfect for stashing keys, AirPods, spare change, or other small essentials.…
This model is a remix of Scottyujans standby dock made to fit an iphone X/XS. Eventhough the iphon X/XS doesent have magsafe it still has wireless charging so it will work on an iphone X/XS my video: His Video: original Design:…
COMMERCIAL LICENSE // UNLOCK ALL FILES DISCORD SERVER // HELP REQUESTS FILAMENTS USED // AMAZON EQUIPMENT Print both the foot-back and foot-front twice. Print with or without Apple Silicone Case Please make sure you choose the correct…
Designed to press fit the Ambrane Wireless Charger for the S21FE, while the top houses the stock Galaxy Watch 4 Charger which can be popped out using the included hole at the bottom. Printed using a BambuLab A1. Charger Puck Dimensions:…
Base para Iphone con soporte para magsafe. Posición Horizontal para activar el modo Standby. Funciona perfecto con mi 15 pro.
Many thanks to @Marlfox_1264389 for the parametric remix and of course to Scott Yu Jan and Overwork for the original design. I've made my modifications in OnShape if you want to edit it. If you have a Quad Lock case, you know it's not…
I wanted to add a simple cover for the dock, so I did. While I was at it, I made a few small changes, like ensuring there were no angles over 60° to make it a little bit more printer-friendly (though it already was). I also tightened up…
The DR-01 is a Standby support for your Iphone. Very inspired by the Dieter Rams DN40 alarm clock (Braun) and the support created by Scoth Yu-Jan: https://www.youtube.com/watch?v=L3nWw8qSYgk The I printed the file in PETG and PLA. To hold…
Are you familiar with iPhone Standby Mode? Two requirements: Your phone must be on charge and it must be in the landscape mode (on its side). You also have to go to settings and choose standby mode, but it's probably already on by…
This fits an iPhone 14 Pro and this case https://www.amazon.com/TORRAS-Magnetic-Compatible-Protective-Translucent/dp/B0B5TNX4XB
Here is the model Ive made for my friend whom needed a dock for the iPhone SE 2020 and his apple watch, it has tolerances for a case, plus a milimeter more, just so it fits in there nicely. The apple watch charging puck is mounted off to…
In response to the very popular iPhone Standby Mode Dock , something that should work for just about any MagSafe iPhone without modification – a simple triangle. Unlike the popular spherical docks, this has a minimal profile and a chamfer…
Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet…
DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…
The Severance iPhone Standby Dock Like you, I love so much about this show - the acting, the story, the darkness and, naturally, the Innies' computers. Meet the Data General Dasher D2 Terminal Computer straight from the Macrodata Research…
Minimal and elegant, this simple yet refined phone stand will elevate the aesthetics of any room you put it in. While it's designed to hold an iPhone in StandBy mode, it can easily be adapted to hold any phone. Even when it's not holding…
This wireless charging dock is based on the DN 40 but has been adapted for a Google Pixel Fold (1st gen). It's available with and without a 1x3 Gridfinity storage area. A Tester model is included so that you can confirm fit before…
Print Tested IEC 60417-5009, the standby symbol (line partially within a broken circle), indicates a sleep mode or low power state. The switch does not fully disconnect the device from its power supply . This may appear on a toggle switch…
standby pod for air up How I Designed This Shapr3d shapr3d Category: Other
Originally, I set out to make the iPhone standby-mode dock by Scott Yu-Jan (original by OVERWERK) in a wife-favorite color as a Mother's Day gift, but I quickly descended deep into the rabbit hole. I started off by parameterizing it so I…
This is a watch charge holder/hub for watches or airpods. Taken all the measurments from the image below. If you want the product's url: https://www.trendyol.com/zore/watch-se-40-44mm-manyetik-sarj-aleti-kablosu-hizli-sarj-p-69083565 (it…
It is suitable for iPhone or Android S series. If you have another phone you can 3D print the phone tester, or if you have another wireless charger, you can first 3D print the Charger Tester to try.
For people who dont have the magsafe charger .. Standby Mode dock only for iphone 16 with case/cover wired. Short in length and Fast print (Around 2Hours) . Might work without supports. Inspired by the Scott Yu-Jan Dock Design. Added a…
This bracket is designed to hold a Meanwell RS-15-5 power supply, as well as this HiLetGo "D1 mini" relay shield with the +5v ground and signal wires soldered directly to the board. The intent of this item is as a standby power supply for…
Basic faceplate for the Piggibank standby docking in order to fit very well the size of the iPhone 15 or 17 (just updated mine) with a simple phone case protector.
Basic faceplate for the Piggibank standby docking in order to fit very well the size of the iPhone 15 or 17 (just updated mine) with a simple phone case protector.
Most Standby compatible docks use wireless charging to juice up the phone. Unfortunately wireless charging is quite inefficient and harmful for the battery of any device. With this in mind I set out to make a wired charging dock of my…
This magsafe iphone holder requieres no supports, is easy to print and sits flush with the table.
BEFORE YOU PRINT: Make sure you have superglue! This is very important, as you need to glue pieces together. Also, you need the magsafe charger from…
Goal My goal was to make a less annoying stand, so the magnet (puck) doesn’t pop out when I pull the phone off. This design trades a bit of minimalism for a wider, more stable base and a screw-together front plate that keeps the puck…
Adaption des bekannten Scott’s iPhone Standby Mode Docks , angepasst für Google Pixel Geräte. Kompatibel mit: Pixel 9 Pro XL Pixel 10 Pro XL Funktionen: Verwendet das Anker Zolo Magnetische kabellose Ladepad (ca. 15 € bei Amazon )…
Inspired by OVERWERK and Scott Yu-Jan's iPhone Standby Dock - YouTube Print Settings This model requires no supports unless your printer is really bad at overhangs. Any modern printer should do fine. I recommended using variable layer…
Description: This is a custom-designed desk stand for the LG StandByME 2 monitor — ideal for using the screen comfortably on a table instead of the original floor stand. Two variants are included: Horizontal mount – compact and stable for…
iPhone stand for standby mode for when you put it horizontally while charging
English below / Englisch unten Diese stylische Dockingstation ist speziell für das iPhone 17 Pro Max konzipiert und passt perfekt auch mit der RhinoShield MagSafe Mod NX Hülle. Der hintere Bereich ist so gestaltet, dass deine Apple Watch…
This is a docking station for phones compatible with magsafe. I wanted a desk organizer that could hold all my pens and a place to charge my phone and display the clock. It is compatible / will fit with any phones capable of wireless…
After upgrading from an iPhone XS to iPhone 17 Pro Max, the Anker desk stand would not charge the new iPhone due to the larger size. This part slips over the Anker stand to allow the iPhone 17 Pro Max to sit on the charger and work in…
OVERWERK and Scott Yu-Jan's beautiful iPhone dock remixed to fit the iPhone 16 with an Anker magsafe charger and the official iPhone 16 magsafe case
iPhone Standby Dock | iPhone 17 & 16 Pro Max (ESR Case Compatible) Elevate your desk setup with this Standby Mode dock, specifically tailored for the iPhone 17 Pro Max and 16 Pro Max using an ESR Case . This remix is inspired by Scott…
Vše bylo přesné. Jen malé nabíjení mělo malou tloušťku a tak jsem vytvořil klín na vytěsnění, aby byl co nejblíže povrchu. dále jsem udělal TPU průchodku zadní části pro dva kabely. Průchodku jsem rozřízl na dvě části ve sliceru a bez…
I wanted to use the new iOS StandBy clock mode, but the IKEA LIVBOJ charger is designed to lie flat. So I designed this simple vertical stand that holds the LIVBOJ securely in an upright position. The result: Your iPhone charges…
Standby charger for an iPhone 15. works with my new Pixel as well. Room for two notebooks at the back, and some storage for pens etc.
My bedroom TV has a bright standby LED that was distracting at night, even with the room lights off. Instead of taping over it or using a temporary fix, I designed a clean, purpose‑built light blocker that snaps into place and hides the…
This is a remix of the power button lever for the Mac Mini M4 from GreaseMokey. The file only includes the IO-knob. Download the rest of the necessary parts from the original creator here:…
A quick release mount for the Votronic 12V Standby Charger ( https://www.12voltplanet.co.uk/votronic-12v-standby-charger-trickle-charger.html ) allowing for easier installation and maintenance. The charger is wired between leisure and…
I keep my Sennheiser Momentum 4 headphones hanging on the side of my desk, and I wanted to replicate the automatic standby behaviour of the official case that puts the headphones to sleep as soon as you store them using a magnet. To do…
Stand originally modeled to fit an iPhone 11/12/13 Pro Max with an Anker PowerWave Qi charge pad in landscape or portrait orientation. It was also tested to fit and charge an iPhone 13, 12, 11, XS, and X as well. Amazon Smile link to the…
Der VOTRONIC StandBy-Charger Pro benötigt eine geignete Fläche zur Montage. Diese ist unter den Fahrersitz des Pössl Summit auf Citroen Jumper Basis nicht gegeben. Daher eine Konstruktion die an einem Kunststoffteil der Sockelverkleidung…
This is the link to the original model: https://makerworld.com/de/models/619414-iphone-12-13-mini-with-case-standby-mode-dock?from=search#profileId-543365 this is the description of the original model: I made a version for my iPhone 13…
Description: After my V0.1 was build i immediately tried to mount a too large spool from RedLine, at the second Job. So, i quickly designed this “Stand By” Holder, with a couple of MR128 bearings i had laying around. (Probably from my…
UPDATE: Added a file with a longer model for apples new standby mode! This should be printed face down. I highly suggest you get your first layer dialed in for this to look clean on the front also a textured sheet makes this look really…
no supports necessary. v3 updated with new cable management direction to allow for either orientation for the iphone
The original model didn't have an alignment pin, makes it hard to assemble, so I fixed it. V2 follows the original model method of printing the base at 100%. V3 uses 4 20 mm*5.5 mm magnets as weight, use pause at layer to embed the…
Increased the opening to fit my USB-C cable Replaced the lower fillet with a chamfer to avoid steep overhang Made wire escape run all the way to the root for hopefully improved cable routing
This is a remix of the “v2” version, with changes to: increase the size of the cable pass-through in the stem to fit the first-party Apple MagSafe usb-c cable end increase the thickness of the main stem for improved strength make the…
Apple iPhone MagSafe stand (for ≥ iOS 17 standby mode). Fits up to iPhone 14 Pro MAX as shown here. The MagSafe charger cable is routed through the holder and foot part to hide it. Underneath the foot some little markers are placed in the…
While I like the original design for the "Standby Stand" there were several problems using it with a guenuine MagSafe charger. This model hopes to address them as follows. I reduced the size of the circular top part, it is now a snug fit…
