Adjustable Base Link for Dani C Drag Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame mountable and height adjustable base link for the Dani C Drag Chain
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the this drag chain as other drag chains I've used had issues when the print head was at 0,0 or 200,0. I would highly recommend it to other SV05 users, as in stock form the wire bundle can catch on a myriad of things.
Should be fine to print at 0.25 layer height or smaller. I used PolyMax PLA, but if you have an enclosure around your printer, ABS/ASA/HIPS or HTPET might be a better option. HTPET would probably squeek.
IMPORTANT
The m3 screws for attaching seem really close together. They are, but I assure you that so long as you that you can get all four screws with t-nuts in the 2020 extrusion just fine. Take some time to think about it. It isn't as much as a puzzle as it might seem.