Adjustable Base Link for Dani C Drag Chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A frame mountable and height adjustable base link for the Dani C Drag Chain
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like the this drag chain as other drag chains I've used had issues when the print head was at 0,0 or 200,0. I would highly recommend it to other SV05 users, as in stock form the wire bundle can catch on a myriad of things.
Should be fine to print at 0.25 layer height or smaller. I used PolyMax PLA, but if you have an enclosure around your printer, ABS/ASA/HIPS or HTPET might be a better option. HTPET would probably squeek.
IMPORTANT
The m3 screws for attaching seem really close together. They are, but I assure you that so long as you that you can get all four screws with t-nuts in the 2020 extrusion just fine. Take some time to think about it. It isn't as much as a puzzle as it might seem.