Portable dice tower with sliding lid/tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portable dice tower with removable tray that doubles as a lid, holding up to 12 dice for easy transport and use.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 584
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This portable dice tower is the perfect addition to your tabletop gaming setup. It consists of two pieces: the tower itself and a removable tray. The tray can be used as a lid, sliding onto the tower and snapping into place in both the open and closed positions. In the closed position, the tray can hold at least 12 regular dice, making it convenient for transport.
This is a small dice tower with little room for the dice to tumble. While this makes it convenient to carry, it has some effect on the randomness.
The design is 3D printable without support, but make sure your printer handles bridges and is well calibrated for smooth sliding parts.
I've printed this tower in polyterra PLA with a 0.20mm layer height.