Liczymy pasujące modele…
Wsporniki ułatwiające wypoziomowanie profili płyt kartonowo-gipsowych CD60. W połączeniu z laserem znacznie ułatwiają pracę, zwłaszcza w pojedynkę. I used ready-made M5 bolts and M5 nuts. Or you can use regular M5x20 screws and print…
Wydruk około 2,11 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Redesigned the Mechanical dice by Pieter, pretty much everything is changed except for the mechanism. List of changes: More forgiving tolerances. Original model, that i have printed on my somewhat calibrated Sovol SV06 was unfortunately…
Introducing the Crew Die for the board game ‘Lying Pirates’. These is the original, highly detailed model that was sent to the factory, boasting more intricacy than the dice in the final game due to production limitations Due to the level…
Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…
This is a printable D6 dice, which I've designed so that the pip-hole radiuses scale with how many there are on each side, to ensure they cut out an equal volume, thus keeping it volumetrically balanced & optimally fair. The faces of the…
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent…
I made this adapter for my BSP D6 telescopic controller to be able to play on my phone (POCO F5 Pro 6.67") in a portrait orientation. Features: The adapter fits phones at least 73 mm wide up to 125 mm. Case/phone thickness compatibility…
Schrittmotor Kurbel mit Zahnrad D6-SW3-H8-Mod1-Z15 und Schrittmotor Kurbel mit Zahnrad D5-SW3-H8-Mod1-Z15
The project: I got an awesome printer renovation and conversion project from a colleague at work. Converting and upgrading a Creatbot D600 industrial 3D printer. It has a massive 600x600x600 build volume and dual extruder with 5KG spool…
I made this wall mount for my external SSD for the Adata ED600 enclosure, to mount behind my Raspberry Pi4 so it is hidden.
D6 Dice with leaf patterns on all faces
This is an experimental remix of @halfwitTomfoolery 's impressive parametric D6
Custom Stroke Dice — d20 + d6 Two dice numbered in a custom stroke script rather than digits. Each face carries a centre line with strokes cut across it; where the strokes sit and how many there are gives the value. You do not memorise…
When printed on MK4, tolerances are little tight (which is fine, at least it won't fall), but if you have less dimensionally acurate printer, maybe slightly increase the size in the slicer. Happy printing 😊.
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
The project: I got an awesome printer renovation and conversion project from a colleague at work. Converting and upgrading a Creatbot D600 industrial 3D printer. It has a massive 600x600x600 build volume and dual extruder with 5KG spool…
Trommel Perle-Stopper H28mm d6mm Kordelstopper geeignet für Streetjacken, Kapuzenpullover, Rucksackschnüre und ähnliches. Bis max. 6mm Kordel / Schnurstärke. Viel Spas P.S. Dies gibt es auch nochmal mit 14mm Höhe für 4mm Schnur unter:…
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
I have no idea why on UPS that work 24/7 manufacturers still doing bright displays that are not turning off after some time. The LCD on PowerShield Defender 600 is very bright during nights so I modelled a simple cover for the screen and…
3D printing settings: Printer Used: Anycubic Kobra S1 Combo Filament: Anycubic PLA+ Color: Black Sparse infill density: 50% Skirt Loops: 2 Layer Height: 0.16mm Nozzle Diameter: 0.4mm Preset: 0.16mm HQ Ironing: All top surface Support:…
A quick model to hold 2 D6 dice at a 45 degree angle so that you can read the side faces easier and provides a modicum of safety that the values won't change. I made this primarily to help me keep track of what season and disc I'm in the…
for FDM printers: layer height: 0.12mm Supports: no Brim: recommended for SLA printers raft: not needed supports:no
I wanted a container to hold some meatal 15mm d6 dice so I made one. You will need 8x 4x2 magnets. Just put 4 magnets in the base and 4in the lid, you may need glue to keep them in. MAKE SURE you check the magnet polarity so they stick…
Fixed the holes of the original D5,D6 - 4x wedge from being too close to the edge so the magnets don't fall out.
This is a tool that helps in leveling of suspended ceilings with CD60 profiles and direct hangers "ES". Should fit hangers of most brands. Slot was specifically enlarged to fit Norgips brand ES hangers. Includes custom *.3mf PrusaSlicer…
There is enough space inside to accommodate 1–2 power supply units.
Направляющая для сверления труб (ДУ6 - ДУ32)
CD60 Spacer/Distancer The whole length of the distancer is 40cm and the inside spacer is 34cm I made this model back in 2024, I don't really remember all the measurements thus I'm attaching STEP file for you to modify it for your own use…
There are plenty of other parametric dice available, but this model is special because it’s mine. Pip placement conforms to JackAce’s die schematic . Now if only I could figure out how to make a multicolor 3MF that displays properly in…
A wall mount for an ASUS ZenWiFi AC Mini (CD6). The wall mount also has spaces to attach screws to mount a TP-Link LS1005G 5-Port Desktop/Wallmount Gigabit Ethernet Switch.
This is a small passive bookshelf speaker I designed for my computer desk. The design squeezes out every bit of low-end performance out of a 2.5" aluminum cone driver. Internal bracing and curved geometry help reduce internal reflections.…
This part is a replacement locking collar / coupling sleeve for the Imetec D6401 immersion blender. The original plastic part that connects the motor unit to the blending shaft is vulnerable to cracking or wearing out over time. Once it…
A pair of D6 with their faces replaced by ticks or crosses so indicate success or failure without needing to reference a number chart. There are two options, a 1/2 chance and a 1/6 chance. These dice were originally designed for the CAIN…
Another D6 dice... Seen so many already... But oh... ,':) This one is different With a chance to roll either an 8 or nothing, as it has but one empty side. >:} Print settings: - 0.10mm layer height (for detail) - 0.4mm or 0.2mm nozzle -…
Reposting of model from Harry_D60 to here on printables so i don't lose track of something i like. These cable organizers worked great for larger power cables, 10-14ft usb/ethernet cables, etc. Harry_D60 suggested printing them with a…
when i was building my Capra audio Satyr 4s i wasn't able to order the recommended earpads from capra themselves, so i ordered HD600 compatible earpads that did not include the ring you're apparently supposed to steal from the old pads.…
Rather than using the sheet metal screws the Scanstrut DS-HD6-BLK came with, I made this mounting plate for m3 screws and nuts. Here's the hardware kit I used Parts list: Scanstrut DS-HD6-BLK (good for ~10 awg solar cable in my…
Tired of Scribbling on a piece of paper whenever you heal or receive damage? Tired of taking notes for your Spellslots aswell!? Then look no further! The HP Tracker works with Magnets, so it turns smoothly and is replacable. you get to…
This is a smaller and slightly simpler version of my DD6. Gilson Rocha messaged me to design a simpler version and here it is. 20mm face to face, ball cornerd and flat faces with a deep 1mm engraving to leave some room for sanding and…
This remix includes a redesigned head base using the TD6S heat sink. This remix also contains a model for the small helper to prevent the M3 nut from falling. Print Settings Printer Brand: Flying Bear Printer: Flying Bear Ghost 5…
A simpel dice tray with a D6 logo on it. Print as you like no special requirements. Scale the x and y axis if you want it smaller or bigger
A device that allows you to easily turn on/off connected appliances while providing essential fuse protection. With a user-friendly interface, it simplifies power control and enhances energy efficiency. 1 socket wall with 43mmx23mm (I'm…
Absolutely print this in resin. The inner die can be left as is, the outer needs to be polished. I have tried various brands of sanding/polishing paper and the zona papers really are the best I've used by a mile. Keep in mind that 3d…
Redesigned the Mechanical dice by Pieter, pretty much everything is changed except for the mechanism. List of changes: More forgiving tolerances. Original model, that i have printed on my somewhat calibrated Sovol SV06 was unfortunately…
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent…
Simple Dell D6000 docking station horizontal stand. Sits on top of standard rectangular support crossbars (see photo). Docking station sits completely inside stand, and stand sits on top of desk rectangular crossbar. Model was split into…
I wanted a way to add a mini xlr female connector to my Superlux hd681 headphones. There is an existing design, but it looked too fragile and does not use a mini xlr connector. This part allows you to use a 3 or 4 pin mini xlr. I need to…
Handle for the Godox AD600 pro studio flash. I printed at 4 wall thickness and 80% infill with gyroid fill pattern and it seems very strong. You will need slightly longer than stock bolts I used m3x16 bolts with small washers Aligned to…
RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…
This is a replacement ring for your Sennheiser HD650/HD6XX headphones that allow you to attach a Massdrop/Drop.com Minimic. It features a 3.2mm clamp as well as slits to fasten your microphone more securely if needed. In my case, I used a…
Simple wristrest for the KBD67mkII which should sit pretty flush with the case and follows the existing typing angle. It prints comes in 2 pieces with little nubs for alignment, so you'll need to epoxy or glue them together after the…
Easy storage case to store up to 6 d6 die with slots to slide in 4 6x3mm magnets on both sides magnets fit snug but i recommend at least a dot of glue just in case
I use the “Condition, Status, Effect Rings for D&D and PF” by Anthony S but the ones I have included here are unique to the EZD6 system and are not in his collection. I printed mine in PLA at 0.3 mm layer height. I used a color swap in…
This is a custom rear mounting bracket for Everbilt drawer rails. This bracket mounts to the rear wall of the cabinet and supports the drawer slides. This works with the D688 series Everbilt Bottom Mount Slide Set which comes in lengths…
When printed on MK4, tolerances are little tight (which is fine, at least it won't fall), but if you have less dimensionally acurate printer, maybe slightly increase the size in the slicer. Happy printing 😊.
DIY Case for RIDEN RD6006 with power supply. Sliced with simplify 3D. Manual supports in overhang locations. Print with opening for RD6006 on bed. designed to be printed split in half and assembled. Feel Free to customise have incuded…
Dimensions are a snug fit with PLA,ASA…, when using TPU, wich i recommend, adjust the sizing to 98% in your slicer to make sure the ring fits best.
This is a very simple model board of the game Knucklebones from the Cult of the Lamb game. It's sized for 12mm D6 dice. It also takes 6x3mm magnets. No special print instructions, no supports.
Unique die design! It may not be Vegas-ready balanced but it is random enough for general purposes. Category: Dice
Musste einen Verteiler durch eine Holzplatte führen und wollte dann das Loch wieder abdecken. Had to run a manifold through a wooden panel and then wanted to cover the hole again.
This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube. My goal is to…
Didn't like the integrated stand on the Fifine Ampligame D6 Stream Controller pad, so I found a Stream Deck specific stand and widened it to properly fit the Fifine. As a result, it still works with the regular Stream Deck (mk 1 or mk 2)…
Halterung für das Samsung Galaxy Fold6 für den CD Schacht im Auto. Das Telefon ist zum Fahrer geneigt und lässt sich so hervorragend ablesen. Bitte so drucken, wie im Bild gezeigt. Support: Tree Brim: Ja Holder for the Samsung Galaxy…
Vypínač napájecího zdroje RIDEN RD6018 má po montáži vůli. Pro vymezení vůle jsem si nakreslil a vytisknul podložku. The main Switch of RIDEN RD6018 PSU has clearance after assembly. To define the play, I designed and printed the spacer.
Halterung für das Samsung Galaxy Fold6 für den CD Schacht im Auto. Das Telefon ist zum Fahrer geneigt und lässt sich so hervorragend ablesen. Bitte so drucken, wie im Bild gezeigt. Support: Tree Brim: Ja Holder for the Samsung Galaxy…
Halterung für das Samsung Galaxy Fold6 für den CD Schacht im Auto. Das Telefon ist zum Fahrer geneigt und lässt sich so hervorragend ablesen. Bitte so drucken, wie im Bild gezeigt. Support: Tree Brim: Ja Holder for the Samsung Galaxy…
Halterung für das Samsung Galaxy Fold6 für den CD Schacht im Auto. Das Telefon ist zum Fahrer geneigt und lässt sich so hervorragend ablesen. Bitte so drucken, wie im Bild gezeigt. Support: Tree Brim: Ja Holder for the Samsung Galaxy…
I've used a generic 4x4x9U Gridfinity bin by AquaticSCP and added an insert for Parkside PAT 4 tacker (that comes without it's own box). I have created it as a box insert for Gridfinity Storage Box by Pred…
Karcher WD6P Vaccum Cleaner connection Tool pipe length : 20mm Diameter : 30 to 39mm (On STEP file per diameter) + 22 + 44 Freecad source file in attachement Print it in PLA
A parametric battery holder for Nikon EN-EL18 series batteries Added a lid (also parametric)
This is only the end part of the system for holding the Samsung Z fold6 with original pen.
This is a simple design for the Suptek MD6802 desktop screen holder. This is not designed to hold any weight, rather it's supposed to stop the upper part of the rod from shaking, which induces stress on the supporting base. This accessory…
A simple box with a sliding door designed to fit an HD60S+ capture card. It features side holes for cable management, with internal space to store cables when not in use. The top includes a tray to hold a Nintendo Switch dock.
I wanted to modify how the rear of my Sakura D6 shock mounted - I wanted the mount lower and extended - so created this file! Printed in PLA with 50% infill works great. The lower screw hole is tight - but it will get there. Two files are…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
All the parts are new, so no recycling of other prints. This die and inserts can be printed without a multi material unit. I tried to make a die that was easy to print with multiple colors without a multi material unit. Size of the die is…
I had to mount some DPS3005 ‘Digital Power Supply’ modules (available on Aliexpress) and a reliable Mean Well HRP-200 power supply in a proper case. Most cases for modules in this format do not provide enough space to include the power…
Ventilation Grid to screw. Square is: 85x85mm The openings are in a diameter of 60mm Screw holes are d:3mm
Designed for the random banana connectors i had laying around. The stem is 5.8mm wide, I made the holes 6.2mm wide. The f3d file is included if yours are different. After printing it for the first time, the top broke of like the original…
Doser counter lever arm for the BNZ MD64 commercial grinder The little lever connects the doser to the doser counter, and is very fragile. Best printed in resin
I needed some dice as replacement for the game “king of the dice”, which are multicolored so I decided to print them by myself. After not finding the perfect solution I created this as my first “real” own project in tinkercad. The body is…
Screen protection for inkBOOK Prime HD (INKBOOKD62HD)
I created these three variations of binary-coded D6 dice using Fusion 360, giving a subtle yet striking digital feel to any board game night. Instead of traditional Arabic numbers, each face is engraved with binary digits, adding an extra…
Adaptateur pour EVA3 Trianglelab watercooling TD6S-LC Peut être coupé au juste après le deuxième insert comme sur la photo.
you will need a Ni-MH/Ni-Cd battery charger, there are plenty cheap ones for RC cars. You will also need 2 uninsulated male spade connectors (standard size, roughly 6.3mm wide), hot glue or preferably epoxy to hold it in place, and wiring…
i thought of a new dice i could add to my collection and got the idea of a d6 but you only can score a zero. it may be a cool feature for a one shoot 20 % infill tree support one side is not so pretty but the others are perfctly could…
Just a little six sided dice I made in tinkercad slapped onto a croc charm base
I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…
Marker for leveling aluminum profiles CD60 with magnet Width 60 mm Magnet 20x3 - 2 pcs
