Sennheiser HD600-series closed caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps (if that's the right term) that replace the grills on Sennheiser HD600-series headphones to make them closed back.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1007
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The existing grills can be pulled off and re-attached without any problems, at least in my experience. They're held in place by an adhesive that is still sticky. So you can try this mod without any risk of damage or without any permanent modifications.
Consider changing filament color for the last few layers that make up the logo.
Note! I have only tested these with HD660S and not with other HD600-series headphones, but to my knowledge they should fit HD600, HD650, HD6XX and so on.
If you print these I would greatly appreciate if you would let me know if they fit your model or not, so I can add that information here in the description. Thank you!