Kallax x Brennenstuhl holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For mounting a Brennenstuhl power strip to the side of a Kallax.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to mount the Brennenstuhl to the side of the Kallax, in order to safe some space on the floor.
Since I already used the https://www.printables.com/model/588950-skadis-to-kallax-adapter on the other side of the same Kallax, it seemed easiest to remix the idea.
This is a first print. It works for me, but I went cheap on the supports. You may want to go all-in if you need a nicer finish on the surface. If you have any idea on how to better orient the parts in the slicer, I'd be happy to read about it.
I have mounted it between the Kallax and the wall, so no need to waste additional filament just for looks.