Case for Raspberry Pi 5 with MacArthur HAT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable case for a Raspberry Pi 5 + MacArthur HAT combination. With brackets to hold it on a flat surface or DIN rail.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 1166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Case to house the Raspberry Pi 5 + MacArthur HAT combination.
It snaps easily on place and can be released without tools.
For assembly use the 4 brass M2.5 16mm hex stand-offs included with the MacArthur HAT.
There is room to also house the two optional modules for power supply management and heading and heel data acquisition.
To allow access to all the connectors it has been necessary to divide it into three parts that are printed separately and mounted one on top of the other and secured with 4 M3 screws in the corners.
I included two types of brackets, one to secure the assembly to a flat surface and another to mount it on a DIN rail.
Note: For the DIN clamp to work correctly, it is important to use a printer with good dimensional accuracy.
If you are considering to add a NVMe drive or other HATs you can check my other modular case design.