Portal Man Remix - 10x3 Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the magnet holes. Requires three 10x3 magnets each man (six total). Remix of a remix...
- Ocena
- 0 / 5
- Polubienia
- 363
- Pobrania
- 350
- Wydruki
- 1
- Wyświetlenia
- 2584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Read the description of the original and test print using just the man's foot - my printer/settings work for these size magnets with just a touch of glue (they press-fit but one popped out). I also glue the man into the frame and glue the outside frame to the inside frame.
Your mileage will vary with print settings and clearances.
I only used 10% infill and very basic settings with 2 walls, alternating a 3rd wall every second layer. 0.2mm layer heights but I'm tempted to do the man in smaller layers next time.
Have fun with colours - I'm going to try some translucents next time.