Filament Tag with Tag Slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Tag with Tag Slots for easy id each channel of ERCF without have to count wheels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Filament tag with tag slots for easy id ERCF channel.
It can be print with anything,
For tags, I suggest you use add text on your tags (ORCA call Embossed text), but cut instead of empossed. Then flip the model to have text lay on the bed. That way you will have smoother front tags. You can cut text 1.4mm deep. You could use embossed, but you cannot store as many tags in the box.
For box, it's tight fit only, if you did not tune your printer well, you will have to fix the cornner of the box for extra filament printed there in order to close the lid. Box can hold 10 tags in each row, 30 altogether. It should have some play in each tag for easy remove.
Slot, it will have lots of play to make sure you can easy slide tag out.
EDIT: Step file included. and add Lid V2 as tag seem to be bit too tall and lid did not fully close.