1 / 1
Rail Hinge for tracksaw and MFT-style table - with larger rotation
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix addresses a shortcoming identified by the original developer: It allows the hinge to rotate past 90 degrees.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1480
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (62)Powiązane
The Fusion 360 model has two new parameters:
- MaxAngle - How far the hinge will move from the flat position.
- PrintAngle - The angle of the rail support for printing. When you first free up the hinge after printing, it will tend to have bumps on the curved portions where they were adjacent to the other side of the hinge during printing. These can be easily sanded off, but by printing in a position that won't be encountered in actual use, they're of no consequence.
The .stl has 0.20 mm tolerances. The hinge is 10 degrees past the flat position.