Liczymy pasujące modele…
Adapter for connecting a Cen-tec Quick-Click dust extraction hose to your Ryobi RPLS18 Plunging Track saw Prints well standing on the hose connector. The only support needed is inside the connector and depending on your filament, maybe a…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…
Model This replaces the cheap clamps that come with the corded Ozito tracksaw and allow you to use Workzone (Aldi) or other generic wood working clamps to firmly hold the tracksaw guide in place while also allowing you to unclamp and move…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
I like my homemade MFT, but I am tired of the parf dogbench clips. I liked Tamar's design for the 3d printed tracksaw hinge (linked below), but it is expensive (plus one needs to add international shipping). I decided to give it a try. My…
I ripped had to change the splinter guard but the shops are closed on weekends, so i made one The stl is 20cm long but you can stretch in the slicer or combine them. TPU is perfect for the job, and does not need to be the fancy one, any…
Dewalt Router Plate For Wen Tracksaw Adapts your Dewalt router to run on a Wen tracksaw track. Fits a Dewalt DW600 20v router. I also included a stop for limiting router travel. There are 2 versions: One locks in the track and the other…
This is a modified version of the original "Rail Hinge for tracksaw and MFT-style table/workbench" made by @d_mg_305332
The Kreg Accu-Cut comes with a saw sled that does not grip the DeWalt DCS565 tight enough. With this print, the it's no longer wobbeling. Designed to align perfectly on the blue guide strip of the Accu-Cut (as the manual suggest, the…
I designed and made this to hold my rails in my workshop, print on its side no supports needed
The Fusion 360 model has two new parameters: MaxAngle - How far the hinge will move from the flat position. PrintAngle - The angle of the rail support for printing. When you first free up the hinge after printing, it will tend to have…
Some things need improvement, that I changed in f3D : - The track holder miss holes for M5 nuts => made it. - The rotation to more than 90°, I don(t measure it but probably 115% (see my page)
Redesigned profile, no need for support while printing in flat position
Based upon the PETG Prusament Clamp. The clamp is obviously not as strong as the original Bosch FSN KZW. But it is significantly cheaper and still works well. I created two versions. The short version is less likely to break while…
Mounts Festool Domino to DeWalt track saw track. Holds Festool Domino vertical as you run it down the track. Print with only bed supports. Connects using two 5MM screws.
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program! I recommend PETG…
Nothing special about the print. Print large side down. You can choose to print either with our without the logo.
Simple print that takes an hour on my Ender at regular quality. print large side down, no supports etc. step file is included if you want to make adjustments for your particular use case. not much else to say really.
A track saw square for the Festool Track. Installed with dovetail interface and no moving parts. The square has fairly tight tolerance and the dimensions are based on the three tracks I have access to. I do not know if this will be…
This is an abomination of Metric and SAE components. You know how it is, you work with what you have. Bar stock - 1in x 0.250in x L of your choosing Bar Screws - 1-/4-20 flat head 5/8in Push Knob screws - M6 Socket Head 20mm Clamp Screws…
This adapter connects a 1.25in vacuum hose to a Ryobi Track Saw
20230322 ： new version has been updated. At first , the knbob is from Here , and thanks Yurshevich They are the perfect substitute for the original ALL the models are for studying only. BOM： Square head bolts M6*20 x2 Nuts M6 x2 Print：…
This is a holder for these [Makita/Festool parallel guides](https://www.thingiverse.com/thing:703165). Either use the provided .3mf or ensure supporting material. I used 40% gyroidal infill for structural support but ymmv.
My take on a tracksaw guide for my Makita trim router. It may fit other trim routers but I don't own any. Will work on any Makita/Festool-style tracksaw guide. Has a guide slot to line up with the center of your router. You'll need…
I found a shaper file of an overhead ceiling-mounted track holder that I liked, but since I do not have a shaper I adapted it for a 3D printer. I made the model for both the Festool rail and Makita one, Makita one being a bit longer.…
Remix of Prateek Rs square. Adjusted for a tighter fit to my Makita & Batavia tracks. Removed slopes and larger roundings for easier upright printing. Added versions that leave space to clamp down the tracks.
There are two models, 2.2mm and 1.8mm for the kerf width of common Festool tracksaw blades.
I made a set of Dude's tracksaw rail caps for my Powertec rails. The caps fit perfectly but unfortunately Powertec did not center their mounting holes which prevents them from being used. This model offsets the rails by 7mm to allow the…
Printed in TPU, these are inserts to store, and protect, the anodized aluminum parallel guides. You can find them on Amazon, I bought mine from Ali express. This is designed to fit inside of the Harbor Freight STOREHOUSE 20-Bin Medium…
I recently was gifted a Makita DSP600 Tracksaw and bought the matching track for it. I watched a video of a guy (I think he slightly looks like Eminem :P) using some wooden rail extenders to evenly cut the splinter guard at start and end…
I suggest printing the part in PETG, which is what I did. I believe PLA would be too shock-sensitive for a vacuum hose that gets dropped and knocked around. I printed with 0.3mm layers except where the notches are on the Festool end,…
Festool Tracksaw Kerf Wedge I was sawing a long live edge piece of lumber and the kerf closed up on my blade causing slight kickback. I wished I had this when I was doing the cut so I designed this. You just place it in the cut kerf as…
BOM for single bar Bar stock - 25x5mm, Al bar, length according need Screws - 2x M6x12 Push Knob screws - 2x M6x20 Nuts 2x M6 Wood hex insert M6 Screw M6x20 Screw M6x40 To be printed using PETG
A simple modification adds a referencing edge to support the tool and track better.
Dust cover for the Makita sp6000 corded track saw There is a version for hard plastik and also a version for TPU and other flexible materiel Both just snap in place Print settings PLA Layer Hight: 0.2 mm Infill: 20 % perimeters: 2 layers…
