Makita Tracksaw Track Extender (First Cut Calibration)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extends the track to easily cut the splinter guard at start and end of the track.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 220
- Wydruki
- 1
- Wyświetlenia
- 1673
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I recently was gifted a Makita DSP600 Tracksaw and bought the matching track for it.
I watched a video of a guy (I think he slightly looks like Eminem :P) using some wooden rail extenders to evenly cut the splinter guard at start and end of rail:
I designed a rail extender you can print and screw down. It worked fine for me, even when the saw was adjusted very tight so there is no play between track and tracksaw.
I don't know if the extender will work for other tracks too. I designed it with 11mm height, 15,8mm width and a 2,20mm fillet.