Milwaukee Router Festool / Powertec / Makita Tracksaw adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
someone asked me to convert a Dewalt router adapter I had posted for my tracksaw to a Milwaukee router!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use the base plate from YodaKubota and my tracksaw adapter part and used OnShape to put them together for someone that asked! Took me about 10 minutes or so once you learn the basic of this great easy to use program!
I recommend PETG (not PLA) because we are talking about a tool...
- I usually do 4 walls and 5 top/bottom with a setting of 0.2/0.4mm quality
- and I use very high density infill like a Honeycomb pattern since I want it to be very very strong and sustain abuse!
- I recommend to use Support but plate the tracksaw rails on top not to have anything messing with the alignment of the tracksaw into the grooves...